Co-electrolysis of steam and CO 2 in full-ceramic symmetrical SOECs: a strategy for avoiding the use of hydrogen as a safe gas
- 12 March 2015
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Faraday Discussions
- Vol. 182, 241-255
Abstract
The use of cermets as fuel electrodes for solid oxide electrolysis cells requires permanent circulation of reducing gas, e.g. H 2 or CO, so called safe gas, in order to avoid oxidation of the metallic phase. Replacing metallic based electrodes by pure oxides is therefore proposed as an advantage for the industrial application of solid oxide electrolyzers. In this work, full-ceramic symmetrical solid oxide electrolysis cells have been investigated for steam/CO 2 co-electrolysis. Electrolyte supported cells with La 0.75 Sr 0.25 Cr 0.5 Mn 0.5 O 3−δ reversible electrodes have been fabricated and tested in co-electrolysis mode using different fuel compositions, from pure H 2 O to pure CO 2 , at temperatures between 850–900 °C. Electrochemical impedance spectroscopy and galvanostatic measurements have been carried out for the mechanistic understanding of the symmetrical cell performance. The content of H 2 and CO in the product gas has been measured by in-line gas micro-chromatography. The effect of employing H 2 as a safe gas has also been investigated. Maximum density currents of 750 mA cm −2 and 620 mA cm −2 have been applied at 1.7 V for pure H 2 O and for H 2 O : CO 2 ratios of 1 : 1, respectively. Remarkable results were obtained for hydrogen-free fuel compositions, which confirmed the interest of using ceramic oxides as a fuel electrode candidate to reduce or completely avoid the use of safe gas in operation minimizing the contribution of the reverse water shift reaction (RWSR) in the process. H 2 : CO ratios close to two were obtained for hydrogen-free tests fulfilling the basic requirements for synthetic fuel production. An important increase in the operation voltage was detected under continuous operation leading to a dramatic failure by delaminating of the oxygen electrode.Keywords
This publication has 36 references indexed in Scilit:
- Coelectrolysis of steam and CO2 in a solid oxide electrolysis cell with ceramic composite electrodesInternational Journal of Hydrogen Energy, 2014
- Catalysis for the Valorization of Exhaust Carbon: from CO2to Chemicals, Materials, and Fuels. Technological Use of CO2Chemical Reviews, 2013
- (La,Sr)(Cr,Mn)O3/GDC cathode for high temperature steam electrolysis and steam-carbon dioxide co-electrolysisSolid State Ionics, 2012
- Sustainable hydrocarbon fuels by recycling CO 2 and H 2 O with renewable or nuclear energyRenewable and Sustainable Energy Reviews, 2011
- Production of Synthetic Fuels by Co-Electrolysis of Steam and Carbon DioxideInternational Journal of Green Energy, 2009
- Syngas Production By Coelectrolysis of CO2/H2O: The Basis for a Renewable Energy CycleEnergy & Fuels, 2009
- Results of recent high temperature coelectrolysis studies at the Idaho National LaboratoryInternational Journal of Hydrogen Energy, 2009
- Syngas Production via High-Temperature Coelectrolysis of Steam and Carbon DioxideJournal of Fuel Cell Science and Technology, 2008
- Technological development of hydrogen production by solid oxide electrolyzer cell (SOEC)International Journal of Hydrogen Energy, 2008
- Energy conversion via solid oxide electrolyte electrochemical cells at high temperaturesSolid State Ionics, 1981