Expandable two‐channel LED driver with galvanic isolation and automatic current balance
Authors:
Open Access
- 1 May 2018
- journal article
- research article
- Published by Institution of Engineering and Technology (IET) in IET Power Electronics
- Vol. 11 (5) , 825-833
Abstract
Here, applying the coupled inductor and the capacitor to the isolated light‐emitting diode (LED) driving circuit is studied, and hence an isolated two‐channel LED driver featuring automatic current balance and zero dc magnetising inductance current is presented. In the proposed LED driver, each winding of the transformer has a capacitor connected in series. Therefore, the dc magnetising inductance current is zero, and hence the entire core B – H curve loop can be utilised, which can lower the core size. Moreover, due to the capacitor on the secondary side, the LED currents can be balanced naturally. The two‐channel isolated LED driver can be extended to a multi‐channel LED driver without increasing the output voltage. Therefore, the duty cycle of the multi‐channel LED driver is determined by the sum of the voltages of two LED strings. Finally, the detailed theoretical analyses and experimental results are provided to verify the feasibility and effectiveness of the proposed LED driver.Keywords
This publication has 28 references indexed in Scilit:
- A High-Efficiency Quasi-Single-Stage Bridgeless Electrolytic Capacitor-Free High-Power AC–DC Driver for Supplying Multiple LED Strings in ParallelIEEE Transactions on Power Electronics, 2015
- A Dimmable LED Driver Based on Current Balancing Transformer With Magnetizing Energy Recycling ConsideredJournal of Display Technology, 2014
- Light‐emitting diode driver with low‐frequency ripple suppressed and dimming efficiency improvedIET Power Electronics, 2014
- Design Considerations for Dual-Output Quasi-Resonant Flyback LED Driver With Current-Sharing TransformerIEEE Transactions on Power Electronics, 2013
- Novel Self-Configurable Current-Mirror Techniques for Reducing Current Imbalance in Parallel Light-Emitting Diode (LED) StringsIEEE Transactions on Power Electronics, 2012
- A Dimmable Light-Emitting Diode (LED) Driver With Mag-Amp Postregulators for Multistring ApplicationsIEEE Transactions on Power Electronics, 2011
- High-Efficiency DC–DC Converter With Twin Bus for Dimmable LED LightingIEEE Transactions on Power Electronics, 2011
- A High-Efficiency Dimmable LED Driver for Low-Power Lighting ApplicationsIEEE Transactions on Industrial Electronics, 2009
- LED Driver With Self-Adaptive Drive VoltageIEEE Transactions on Power Electronics, 2008
- LED Backlight Driving System for Large-Scale LCD PanelsIEEE Transactions on Industrial Electronics, 2007