A reinforced corrosion assessment method based on a new magnetic sensor and improved adaptive filtering
Authors:
- 2 August 2023
- journal article
- research article
- Published by Walter de Gruyter GmbH in TM - Technisches Messen
- Vol. 90 (10) , 659-671
Abstract
Corrosion assessment of reinforced concrete structures is the basis for subsequent corrosion repair and early warning of structural hazards. Aiming at the problem of accurately measuring the corrosion degree of reinforced concrete structures in coastal area, a new Magnetic Sensor (NMS) based on the theory of magnetic medium is designed in this paper. A functional model of the relationship between magnetic induction intensity change and reinforcement mass loss based on multi-point detection is constructed, and an improved adaptive filtering Least Mean Square (LMS) algorithm is proposed to realize damage identification and quantitative calculation of reinforcement corrosion comprehensively. Through numerical simulation experiments, the feasibility of designing the sensor is verified. The measured corrosion test of the sensor prototype shows that the calculated corrosion rates of different steel corrosion degrees are in good agreement with the actual values, with an average relative error of 1.64 %. The sensor provides a new method for corrosion monitoring of reinforced concrete structures.Keywords
Funding Information
- National Natural Science Foundation of China (U2106221)
This publication has 25 references indexed in Scilit:
- Combined application of novel electromagnetic sensors and acoustic emission apparatus to monitor corrosion process of reinforced bars in concreteConstruction and Building Materials, 2020
- Use of a novel electro-magnetic apparatus to monitor corrosion of reinforced bar in concreteSensors and Actuators A: Physical, 2019
- An innovative corrosion evaluation technique for reinforced concrete structures using magnetic sensorsConstruction and Building Materials, 2017
- Non-uniform distribution of a corrosion layer at a steel/concrete interface described by a Gaussian modelCorrosion Science, 2016
- The Non-Destructive Test of Steel Corrosion in Reinforced Concrete Bridges Using a Micro-Magnetic SensorSensors, 2016
- Electrical Resistance Tomography imaging of concreteCement and Concrete Research, 2010
- Modeling corroded section configuration of steel bar in concrete structureConstruction and Building Materials, 2009
- Measurement radius of reinforcing steel bar in concrete using digital image GPRConstruction and Building Materials, 2009
- Macrocell sensor systems for monitoring of the corrosion risk of the reinforcement in concrete structuresNDT & E International, 2001
- Ultrasonic Investigation of Concrete with Distributed DamageACI Materials Journal, 1998