Fault-Tolerant Control of MMC With Hot Reserved Submodules Based on Carrier Phase Shift Modulation
Authors:
- 15 November 2016
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 32 (9) , 6778-6791
Abstract
Reliability is one of the most important challenges for the modular multilevel converter (MMC), which is composed of a large number of power electronics submodules (SMs). In order to increase the system reliability, the reserved SMs are often utilized. A novel strategy is proposed in this paper to implement the fault-tolerant control of MMC with the hot reserved SMs based on the carrier phase shift modulation. All the SMs, including the hot reserved SMs, work in the operating mode and the standby mode in turns. A rotating sliding choice box is adopted to select the operating SMs and the corresponding phase-shift angles, which enables the equal burden of each SM. Once the faults are detected and localized, the reserved SMs can simultaneously replace the bypassed failed SMs, which guarantees the fault-tolerant operation with a nearly seamless transition and very short recovery time. Furthermore, the line cycle is set as the rotating period in the control strategy, without increasing much switching loss. The mismatch pulses are greatly reduced as well. This technique can also be easily implemented in a DSP or microcontroller. Simulations in MATLAB/Simulink and experiments based on a downscaled MMC prototype have verified the feasibility and effectiveness of the proposed control strategy.Keywords
Funding Information
- National Natural Science Foundation of China (51490683, 51577100)
- Program of State Key Laboratory of Power System in Tsinghua University (SKLD15Z01)
This publication has 28 references indexed in Scilit:
- Precise control law of MMC and its application in reducing capacitor voltage ripple by injecting circulating current2015
- Analysis, Detection, and Location of Open-Switch Submodule Failures in a Modular Multilevel ConverterIEEE Transactions on Power Delivery, 2015
- An IGBT open-circuit fault detection method for modular multilevel converters2015
- Seamless Transition Control for Modular Multilevel Converters When Inserting a Cold-Reserve Redundant SubmoduleIEEE Transactions on Power Electronics, 2015
- Fault Detection for Modular Multilevel Converters Based on Sliding Mode ObserverIEEE Transactions on Power Electronics, 2013
- Active Redundant Submodule Configuration in Modular Multilevel ConvertersIEEE Transactions on Power Delivery, 2013
- A Steady-State Analysis Method for a Modular Multilevel ConverterIEEE Transactions on Power Electronics, 2013
- Design and Control of a Modular Multilevel HVDC Converter With Redundant Power Modules for Noninterruptible Energy TransferIEEE Transactions on Power Delivery, 2012
- Reduced Switching-Frequency Modulation and Circulating Current Suppression for Modular Multilevel ConvertersIEEE Transactions on Power Delivery, 2011
- A Literature Review of IGBT Fault Diagnostic and Protection Methods for Power InvertersIEEE Transactions on Industry Applications, 2009