Work Function Tailoring of Carbon-Added Tungsten Gate Electrodes
Authors:
- 1 January 2011
- journal article
- research article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 158 (2) , H146-H149
Abstract
In this work, carbon-added tungsten ( W1−xCxW1−xCx , x⩽0.19x⩽0.19 ) and thin carbon layer-inserted tungsten ( Wtop∕C∕WbottomWtop∕C∕Wbottom , the thickness of WbottomWbottom is set to be 2nm2nm and 10nm10nm ) gate stacks are deposited on SiO2∕SiSiO2∕Si to fabricate metal-oxide-semiconductor capacitors. Grazing incident angle X-ray diffraction reveals that the W1−xCxW1−xCx films become amorphous when the concentration of added C is lower than 16 atom %. However, when the C concentration is as high as 19 atom %, a trace of γ phase of tungsten carbide phase appears in the W0.81C0.19W0.81C0.19 film. No interdiffusion between C-added W and SiO2SiO2 is observed by Auger electron spectroscopy depth profiling. The resistivity of W, W0.88C0.12W0.88C0.12 , W0.84C0.16W0.84C0.16 , and W0.81C0.19W0.81C0.19 are 132, 151, 163, and 337μΩcm337μΩcm , respectively. The work function of W0.81C0.19W0.81C0.19 , W0.84C0.16W0.84C0.16 , W0.88C0.12W0.88C0.12 , W, W∕C∕WW∕C∕W (10nm)(10nm) , and W∕C∕WW∕C∕W (2nm)(2nm) on SiO2SiO2 are 4.82, 4.75, 4.73, 4.66, 4.52, and 4.32eV4.32eV , respectively. The C-related dipole shows apparent influence on the work function. The leakage current densities of C-added W films are smaller than 2×10−5A∕cm22×10−5A∕cm2 in the range from 0to5×107V∕cm0to5×107V∕cm . No significant influence of these gate electrodes on the fixed oxide charge and the leakage behavior of SiO2SiO2 are observed.Keywords
This publication has 23 references indexed in Scilit:
- Influence of Si Content on the Phase Formation of W[sub 1−x]Si[sub x](0.30≤x≤0.74) Gate Electrodes and Their Work FunctionElectrochemical and Solid-State Letters, 2008
- The Influence of Si Content on the Work Function of W[sub 1−x]Si[sub x] (x≤14 atom %) Gate ElectrodesElectrochemical and Solid-State Letters, 2008
- Work Function Shift Mechanism of Metal-Gate Electrode with Ru∕Ti BilayerElectrochemical and Solid-State Letters, 2007
- Dependence of crystal structure and work function of WNx films on the nitrogen contentApplied Physics Letters, 2006
- Effect of the composition on the electrical properties of TaSi/sub x/Ny metal gate electrodesIEEE Electron Device Letters, 2003
- Reduction of effective dielectric constant of gate insulator by low-resistivity electrodesApplied Physics Letters, 2002
- A method for measuring barrier heights, metal work functions and fixed charge densities in metal/SiO2/Si capacitorsApplied Physics Letters, 2002
- Adhesion, stability, and bonding at metal/metal-carbide interfaces: Al/WCSurface Science, 2002
- Electrodeposition of Tungsten in ZnBr2 ‐ NaBr and ZnCl2 ‐ NaCl MeltsJournal of the Electrochemical Society, 1991
- Bulk and surface electronic structure of hexagonal WCPhysical Review B, 1984