Preparation of Pb(Zrx, Ti1-x)O3 Thin Films by Source Gas Pulse-Introduced Metalorganic Chemical Vapor Deposition
Authors:
- Masanori ArataniMAMasanori Aratani
- Kuniharu NagashimaKNKuniharu Nagashima
- Hiroshi FunakuboHFHiroshi Funakubo
- 1 June 2001
- journal article
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 40 (6R) , 4126-4130
Abstract
We prepared Pb(Zr x , Ti1-x )O3 [PZT] thin films on (111)Pt/Ti/SiO2/Si substrates at 620°C by metalorganic chemical vapor deposition (MOCVD). PZT [Zr/(Zr+Ti)=0.68] thin films of different thicknesses prepared by the conventional continuous source gas introduction MOCVD (continuous-MOCVD) and by pulsed gas introduction MOCVD (pulse-MOCVD) were compared to investigate the growth mechanism of these films. Stoichiometric PZT films were obtained for a wider range of Pb source input gas flow rates under fixed Zr and Ti sources for pulse-MOCVD compared with that for continuous-MOCVD. Highly (111)-oriented films were obtained for pulse-MOCVD regardless of their thickness, while the (111)-orientation decreased with film thickness for continuous-MOCVD. This suggests that the orientation homogeneity along the film thickness is higher for pulse-MOCVD films than for continuous-MOCVD films. The surface roughness of the pulse-MOCVD films was smaller than that of the continuous-MOCVD films and this result corresponds to the decrease of the leakage current density of the film. Well-saturated hysteresis loops with good square shapes were obtained, and the remanent polarization (P r) and the coercive field (E c) values of 100-nm-thick films prepared by pulse-MOCVD were 37 µC/cm2 and 82 kV/cm, respectively.Keywords
This publication has 18 references indexed in Scilit:
- Improvement of Property of Pb(ZrxTi1-x)O3 Thin Film Prepared by Source Gas Pulse-Introduced Metalorganic Chemical Vapor DepositionJapanese Journal of Applied Physics, 2000
- Y2O3-Stabilized ZrO2 Thin Films Prepared by Metalorganic Chemical Vapor DepositionJapanese Journal of Applied Physics, 1998
- High Temperature Barrier Electrode Technology for High Density Ferroelectric Memories with Stacked Capacitor StructureJournal of the Electrochemical Society, 1998
- Grain morphology and cation composition heterogeneity of Pb(ZrxTi1–x)O3 thin films deposited by metal-organic chemical vapor depositionJournal of Materials Research, 1998
- Microstructure and properties of PbZr1-xTixO3 thin films made by one and two step metalorganic chemical vapor depositionIntegrated Ferroelectrics, 1997
- Electronic Conduction Characteristics of Sel-Gel Ferroelectric Pb(Zr0.4Ti0.6)O3 Thin-Film Capacitors: Part IIJapanese Journal of Applied Physics, 1995
- Deposition Condition of Epitaxially Grown PZT Films by CVDJournal of the Ceramic Society of Japan, 1994
- Characterization of Epitaxially Grown CVD-Pb(Zr, Ti) O3 Films with High Deposition RateJournal of the Ceramic Society of Japan, 1994
- Multi-ion-beam reactive sputter deposition of ferroelectric Pb(Zr,Ti)O3 thin filmsJournal of Applied Physics, 1992
- Growth of Epitaxial PLZT Film by CVDJournal of the Ceramic Society of Japan, 1991