Ag Alloying and KF Treatment Effects on Low Bandgap CuInSe2 Solar Cells
Open Access
- 5 March 2019
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 9 (3) , 906-911
Abstract
Silver alloying and KF post-deposition treatments are explored as approaches to increase the efficiency of low bandgap CuInSe2 (CIS) solar cells. The KF treatment prevents a loss in VOC when CIS has a thinner CdS layer, and also increases the carrier concentration of these devices. Compared with CIS devices, Ag alloyed CIS (ACIS) devices have lower efficiencies due to a lower carrier concentration which decreases VOC. When ACIS is exposed to the KF treatment, the resulting devices have reduced VOC and fill factor (FF) compared with untreated devices; however, thinning the CdS layer with KF-treated ACIS improves VOC. ACIS+KF films show an unidentified compound in Raman spectra and the resulting solar cells have a dominant interface recombination mechanism and light-to-dark crossover. An electron microscopy study of the growth and coverage of CdS reveals that KF-treated samples in this study have faster CdS growth and ACIS+KF has complete CdS coverage with less than half of the normal deposition time. Improved coverage of CdS layers on KF-treated samples is also verified by X-ray photoelectron spectroscopy. Finally, using a heat treatment and an anti-reflection layer enables CIS+KF solar cells to obtain a high 16.0% efficiency for CIS with a VOC = 526 mV and JSC = 41.0 mA/cm2.Keywords
Funding Information
- National Science Foundation (1507351)
- XPS instrument supported by NSF (1428149)
This publication has 39 references indexed in Scilit:
- Chemical bath deposition of Zn(O,S) and CdS buffers: Influence of Cu(In,Ga)Se2 grain orientationApplied Physics Letters, 2013
- Capacitance Spectroscopy of Thin‐Film Solar Cells2011
- Raman investigations of Cu(In,Ga)Se2 thin films with various copper contentsThin Solid Films, 2008
- Band-structure anomalies of the chalcopyrite semiconductors versus ( and Se) and their alloysPhysical Review B, 2007
- Thin‐film solar cells: device measurements and analysisProgress in Photovoltaics: Research and Applications, 2004
- Optimization of CBD CdS process in high-efficiency Cu(In,Ga)Se2-based solar cellsThin Solid Films, 2002
- Raman scattering in In2Se3 and InSe2 amorphous filmsJournal of Non-Crystalline Solids, 2000
- Effect of impurities in the CdS buffer layer on the performance of the Cu(In, Ga)Se2 thin film solar cellJournal of Applied Physics, 1999
- Influence of substrates on the electrical properties of Cu(In,Ga)Se2 thin filmsSolar Energy Materials and Solar Cells, 1996
- Polycrystalline heterojunction solar cells: A device perspectivePhysica Status Solidi (b), 1996