Numerical analysis of dynamic characteristics and fatigue life of worn chain rings in scraper conveyors
- 8 September 2025
- journal article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 239 (22) , 9398-9408
Abstract
Scraper conveyors operate in harsh environments, leading to wear and breakage of the chain rings. To analyze the dynamic characteristics and fatigue failure of chain rings under realistic wear conditions, this study utilizes 3D scanning to create worn chain ring models, which are incorporated into the scraper conveyor rigid-discrete coupling model for simulation. The dynamic characteristics, including chain tension, displacement, and contact forces among the coal particles, sprockets, and chain, are investigated through coupled simulation. The stress distribution and fatigue life of both normal and worn chain rings are analyzed using the finite element method, and fatigue crack propagation is investigated using ABAQUS and FRANC3D. The results indicate that the contact force, maximum equivalent stress, and strain are lower when the worn chain ring engages with the sprocket compared to the normal chain ring. Additionally, the displacement in the Z -direction increases by approximately 11 mm during chain return. The fatigue life decreases significantly, with the normal chain ring experiencing 3462 load cycles, while the worn chain ring undergoes only 68.44 cycles. Crack analysis reveals a non-linear relationship between crack depth expansion and load cycles, with the crack expansion rate increasing fourfold.Keywords
This publication has 24 references indexed in Scilit:
- Research on scraper conveyor load prediction method based on wavelet transform and BP neural networkScientific Reports, 2025
- Scraper conveyor gearbox fault diagnosis based on multi-source heterogeneous data fusionMeasurement, 2025
- Time-dependent fatigue reliability estimation and optimal design of scraper chains under corrosive wear effectMechanics Based Design of Structures and Machines, 2024
- Triboactive coatings for wear and friction reduction in chain drivesTribology International, 2023
- Time-dependent reliability and optimal design of scraper chains based on fretting wear processEngineering Computations, 2021
- Wear Analysis for Ring Chain of a Heavy-Load Scraper Conveyor under Different Environment MediaTribology Transactions, 2020
- Power management control strategy for hybrid energy storage system in a grid‐independent hybrid renewable energy system: a hardware‐in‐loop real‐time verificationIET Renewable Power Generation, 2020
- Hertz‐Mindlin Theory of Contacting Grains and the Effective‐Medium Approximation for the Permeability of Deforming Porous MediaGeophysical Research Letters, 2019
- A Sphere Filling Algorithm for Irregular Aggregate Particle Generation based on Nonlinear Optimization MethodKSCE Journal of Civil Engineering, 2018
- The new IIW recommendations for fatigue assessment of welded joints and components – A comprehensive code recently updatedInternational Journal of Fatigue, 2009