Enhancement of plasma ion temperature by impurity seeding in H-mode plasmas
- 20 September 2021
- journal article
- research article
- Published by IOP Publishing in Nuclear Fusion
- Vol. 61 (11) , 116048
Abstract
Effect of impurity seeding on plasma global confinement has been investigated in H-mode plasmas of the HL-2A tokamak. Metal and gas impurities can be externally seeded by laser blow-off (LBO) and supersonic molecular beam injection (SMBI) systems, respectively. Using the LBO system to seed aluminium impurities into H-mode plasmas, it is observed that the ELM frequency after the impurity seeding is reduced by about 50%. The plasma stored energy is enhanced. The corresponding energy loss caused by each ELM increases with the decrease of ELM frequency. Besides, the neon and argon gas impurities have been seeded into H-mode plasmas by SMBI. The ELM frequency decreases to 0.3-0.5 times lower than that before the SMBI. The prolonged inter-ELM periods allow the plasma to build a higher pedestal density. It is observed that the energy confinement of the H-mode plasma is improved by the edge-deposited impurities, which is mainly attributed to the enhancement of plasma ion temperature. Both the edge and core ion temperatures are increased by 20-40% after the impurity seeding. The quasi-linear simulations predict that the ion heat flux induced by ion temperature gradient mode is deceased in the present of impurity. The result suggests that the seeded impurity could reduce the edge ion thermal transport, resulting in the formation a higher edge ion temperature, which is a boundary condition for further increasing the core temperature through the profile stiffness.Keywords
Funding Information
- National Natural Science Foundation of China (11922503)
- National Key R&D Program of China (2017YFE0301106)
This publication has 41 references indexed in Scilit:
- Confinement of ‘improved H-modes’ in the all-tungsten ASDEX Upgrade with nitrogen seedingNuclear Fusion, 2011
- Power requirements for superior H-mode confinement on Alcator C-Mod: experiments in support of ITERNuclear Fusion, 2011
- Penetration characteristics of supersonic molecular beam injection on HL-2A tokamakNuclear Fusion, 2010
- Investigations of impurity seeding and radiation control for long-pulse and high-density H-mode plasmas in JT-60UNuclear Fusion, 2009
- Seeding of impurities in JET H-mode discharges to mitigate the impact of ELMsPlasma Physics and Controlled Fusion, 2002
- Hydrogen cluster-like behaviour during supersonic molecular beam injection on the HL-1M tokamakNuclear Fusion, 2001
- Radiative plasma by impurity seeding in W-shaped pumped divertor experiment of JT-60UJournal of Nuclear Materials, 1999
- H-mode pedestal characteristics, ELMs, and energy confinement in ITER shape discharges on DIII-DPlasma Physics and Controlled Fusion, 1998
- Results and modelling of high power edge radiation cooling in TextorPhysica Scripta, 1995
- Confinement improvement in beam heated ISX-B discharges with low-z impurity injectionJournal of Nuclear Materials, 1984