Amorphous carbon interlayers for gold on elastomer stretchable conductors
Authors:
- C L Tuinea-BobeCTC L Tuinea-Bobe
- D DixonDDD Dixon
- P D MaguirePMP D Maguire
- 1 June 2011
- journal article
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 44 (24)
Abstract
Gold on polydimethylsiloxane (PDMS) stretchable conductors were prepared using a novel approach by interlacing an hydrogenated amorphous carbon (a-C : H) layer between the deposited metal layer and the elastomer. AFM analysis of the a-C : H film surface before gold deposition shows nanoscale buckling, the corresponding increase in specific surface area corresponds to a strain compensation for the first 4–6% of bi-axial tensile loading. Without this interlayer, the deposited gold films show much smaller and uni-directional ripples as well as more cracks and delaminations. With a-C : H interlayer, the initial electrical resistivity of the metal film decreases markedly (280-fold decrease to 8 × 10−6 Ω cm). This is not due to conduction within the carbon interlayer; both a-C : H/PDMS and PDMS substrates are electrically insulating. Upon cyclic tensile loading, both films become more resistive, but return to their initial state after 20 tensile cycles up to 60% strain. Profiling experiments using secondary ion mass spectroscopy and x-ray photoelectron spectroscopy indicate that the a-C : H layer intermixes with the PDMS, resulting in a graded layer of decreasing stiffness. We believe that both this graded layer and the surface buckling contribute to the observed improvement in the electrical performance of these stretchable conductors.Keywords
This publication has 41 references indexed in Scilit:
- Curvilinear Electronics Formed Using Silicon Membrane Circuits and Elastomeric Transfer ElementsSmall, 2009
- Mechanical Buckling: Mechanics, Metrology, and Stretchable ElectronicsAdvanced Functional Materials, 2009
- A hemispherical electronic eye camera based on compressible silicon optoelectronicsNature, 2008
- Stretchable and compressible thin films of stiff materials on compliant wavy substratesApplied Physics Letters, 2008
- Design of metal interconnects for stretchable electronic circuitsMicroelectronics Reliability, 2008
- Controlled buckling of semiconductor nanoribbons for stretchable electronicsNature Nanotechnology, 2006
- Inherently conducting polymer modified polyurethane smart foam for pressure sensingSensors and Actuators A: Physical, 2005
- Thin-film transistor circuits on large-area spherical surfacesApplied Physics Letters, 2002
- Tensile testing of free-standing Cu, Ag and Al thin films and Ag/Cu multilayersActa Materialia, 2000
- Electroviscoelastic effect of polymer blends consisting of silicone elastomer and semiconducting polymer particlesMacromolecules, 1993