Performance of Ferrite‐Based Electrodes for Steam Electrolysis in Symmetrical Solid Oxide Cells
Open Access
- 8 June 2024
- journal article
- research article
- Published by Wiley in Advanced Materials Interfaces
- Vol. 11 (19)
Abstract
There is an increasing interest in the exploration of non‐Nickel cathode materials for steam electrolysis in solid oxide electrolysis cells (SOEC) for green hydrogen production with high Faradaic efficiencies. Ferrite‐based ceramic materials have drawn a lot of attention in this regard due to their appreciable mixed ionic electronic conductivity. This work aims to explore a ferrite‐based mixed ionic electronic conductor electrode for symmetrical SOEC that can contribute significantly to simplifying the manufacturing processes. A composite of silver (Ag) and A‐site deficient lanthanum strontium cobalt ferrite ((La0.60Sr0.40)0.95Co0.20Fe0.80O3‐x), is studied for steam electrolysis in a yttria stabilized zirconia electrolyte‐supported symmetrical tubular solid oxide cell. A considerable current density of 250 mA cm−2 is obtained at 1.5 V and 800 °C in a Helium‐Steam atmosphere (50% humidified) with a corresponding polarization resistance as low as 0.15 Ω‐cm2. The polarization resistance is comparable to a number of electrodes reported in the literature for steam electrolysis. However, a 10% drop in current density is observed during the first 20 h of electrolysis at 1.5 V and 800 °C in a Helium‐Steam atmosphere (50% humidified), but no further drop is encountered during the next 46 h of continuous operation.Keywords
This publication has 44 references indexed in Scilit:
- Production of syngas with controllable H2/CO ratio by high temperature co-electrolysis of CO2 and H2O over Ni and Co- doped lanthanum strontium ferrite perovskite cathodesApplied Catalysis B: Environment and Energy, 2019
- Enhancing the performance of high-temperature H2O/CO2 co-electrolysis process on the solid oxide Sr2Fe1.6Mo0.5O6-δ-SDC/LSGM/Sr2Fe1.5Mo0.5O6-δ-SDC cellElectrochimica Acta, 2019
- The electrochemical performance and CO2 reduction mechanism on strontium doped lanthanum ferrite fuel electrode in solid oxide electrolysis cellElectrochimica Acta, 2018
- Ceramic composite cathodes for CO2 conversion to CO in solid oxide electrolysis cellsApplied Energy, 2018
- A-site deficient (La0.6Sr0.4)1–Co0.2Fe0.6Nb0.2O3– symmetrical electrode materials for solid oxide fuel cellsElectrochimica Acta, 2018
- Pr and Ti co-doped Strontium Ferrite as a Novel Hydrogen Electrode for Solid Oxide Electrolysis CellElectrochimica Acta, 2017
- Redox-reversible perovskite ferrite cathode for high temperature solid oxide steam electrolyserElectrochimica Acta, 2017
- Efficient electrolysis of CO2 in symmetrical solid oxide electrolysis cell with highly active La0.3Sr0.7Fe0.7Ti0.3O3 electrode materialElectrochemistry Communications, 2016
- Perovskite titanate cathode decorated by grown iron nanocatalyst with enhanced electrocatalytic activity for high-temperature steam electrolysisElectrochimica Acta, 2014
- Effect of surface decoration with LaSrFeO4 on oxygen mobility and catalytic activity of La0.4Sr0.6FeO3−δ in high-temperature N2O decomposition, methane combustion and ammonia oxidationApplied Catalysis A: General, 2013