Output beam analysis of an unstable resonator with a large Fresnel number for a chemical oxygen iodine laser
Authors:
- 1 October 2002
- journal article
- Published by SPIE-Intl Soc Optical Eng in Optical Engineering
- Vol. 41 (10) , 2668-2674
Abstract
During the operation of a laser in an unstable resonator with a large Fresnel number, as the output power of a chemical oxygen iodine laser (COIL) is increased, instability in the output laser beam will occur, behaving mainly as far-field beam spot drift and deformation. To interpret this phenomenon, a simulation of the output beam mode of this kind of laser was developed by using the method of fast Fourier transform. From the result of calculation, we propose that the presence of the nonuniform gain in the COIL produces a skewed output intensity distribution, which causes the mirror to tilt and bulge due to thermal expansion. As the output power is increased, the mirror surface, especially the back of the scraper mirror, will absorb more and more heat, causing thermal expansion of the mirror front surface to occur more seriously, thus resulting in the tilting and deformation of the far-field beam spot. The initial misalignment of the direction is also an important factor leading to far-field beam spot drift and deformation. © 2002 Society of Photo-Optical Instrumentation Engineers.Keywords
This publication has 6 references indexed in Scilit:
- Airborne laser flight-weighted laser module (FLM) and COIL modeling support2000
- Temporal and 2-D small-signal gain measurements in a supersonic COILIEEE Journal of Quantum Electronics, 1998
- Chemical oxygen-iodine laser performance modeling1997
- Thermal analysis of transmissive elements in high-average-power laser beam delivery systems1993
- Mode calculations in unstable resonators with flowing saturable gain 2: Fast Fourier transform methodApplied Optics, 1975
- Iterative Diffraction Calculations of Transverse Mode Distributions in Confocal Unstable Laser ResonatorsApplied Optics, 1973