Laminar Flame Speed Based Optimization of Efficiency and Emissions for Methane-Hydrogen Fueled SI Micro-Generators
Authors:
- 5 September 2021
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
Within the context of environmental impact reduction for small size spark ignition (SI) engines, especially green-house gas emissions, this study looked at laminar flame speed as an optimization parameter for hydrogen-methane fueled micro-generators. To this aim, SI engine operation was modeled in a 0D/1D simulation framework, so as to identify the best choice of methane-hydrogen ratios in different conditions. Starting from experimental data recorded on a small size engine, an optimization method was implemented for achieving the proposed goal. One of the main conclusions is that high concentrations of hydrogen and resulting fast burn rates are beneficial at high engine speed settings, while the opposite is true at low engine speed. Hydrogen addition was also considered as an additional control margin during lean operation, given that stable combustion can be achieved even with very low equivalence ratios. This aspect was closely correlated to limits imposed by non-road emission standards.Keywords
This publication has 43 references indexed in Scilit:
- Measurement and correlation of laminar flame speeds of CO and C2 hydrocarbons with hydrogen addition at atmospheric and elevated pressuresInternational Journal of Hydrogen Energy, 2011
- Conversion of a gasoline engine-generator set to a bi-fuel (hydrogen/gasoline) electronic fuel-injected power unitInternational Journal of Hydrogen Energy, 2011
- Direct injection of hydrogen, oxygen and water in a novel two stroke engineInternational Journal of Hydrogen Energy, 2011
- Derivation of burning velocities of premixed hydrogen/air flames at engine-relevant conditions using a single-cylinder compression machine with optical accessInternational Journal of Hydrogen Energy, 2010
- Hydrogen-fueled internal combustion enginesProgress in Energy and Combustion Science, 2009
- Numerical comparison of premixed laminar flame velocity of methane and wood syngasFuel, 2009
- Fuel economy and emissions evaluation of BMW Hydrogen 7 Mono-Fuel demonstration vehiclesInternational Journal of Hydrogen Energy, 2008
- Laminar and unstable burning velocities and Markstein lengths of hydrogen–air mixtures at engine-like conditionsProceedings of the Combustion Institute, 2005
- Analysis of the degree of constant volume and cooling loss in a spark ignition engine fuelled with hydrogenInternational Journal of Engine Research, 2001
- Characterisation of cylinder bore surface finish— A review of profile analysisWear, 1972