Stresses in nearly incompressible materials by finite elements with application to the calculation of excess pore pressures
Author:
- 1 January 1974
- journal article
- research article
- Published by Wiley in International Journal for Numerical Methods in Engineering
- Vol. 8 (3) , 443-460
Abstract
A number of problems are analysed by the displacement method to assess the stress accuracy at very low compressibilities. ‘Parabolic’ isoparametric elements are used. It is found that the mean stress becomes grossly in error at the centre and edges of each element as the compressibility is reduced whereas the deviatoric stress components do not. All stress components retain good accuracy at the ‘reduced’ integration sampling points (2 × 2 Gauss). ‘Exact’ integration yields a similar stress distribution to ‘reduced’ but the mean stress is grossly in error at the integration points (3 × 3 Gauss). Exceptions, however, occur.These findings are interpreted, and a rule for predetermining whether or not accurate stresses can be obtained at the integrating points is suggested. Thus it is shown that the displacement method is suitable for analysing materials which for practical purposes are incompressible.A procedure is then presented for analysing porous media‐both linear and non‐linear‐by separating the stiffness into ‘effective’ and ‘pore fluid’ components. This allows excess pore pressure to be calculated explicitly. Applications to saturated soils are given which make use of the findings of the first part of the paper.Keywords
This publication has 12 references indexed in Scilit:
- Local and global smoothing of discontinuous finite element functions using a least squares methodInternational Journal for Numerical Methods in Engineering, 1974
- Interpretation of Finite Element Procedure as Stress Error Minimization ProcedureJournal of the Engineering Mechanics Division, 1972
- Analytical Study of a Braced Excavation in Weak ClayCanadian Geotechnical Journal, 1972
- On the calculation of consistent stress distributions in finite element approximationsInternational Journal for Numerical Methods in Engineering, 1971
- Reduced integration technique in general analysis of plates and shellsInternational Journal for Numerical Methods in Engineering, 1971
- Incremental Numerical Solution of a Simple Deformation Problem in Soil MechanicsGéotechnique, 1970
- Gravitational stress field around a tunnel in soft groundCanadian Geotechnical Journal, 1970
- Basis of finite element methods for solid continuaInternational Journal for Numerical Methods in Engineering, 1969
- Undrained Stress Distribution by Numerical MethodsJournal of the Soil Mechanics and Foundations Division, 1968
- Elasticity equations for incompressible and nearly incompressible materials by a variational theorem.AIAA Journal, 1965