Toward High Efficient Cu2ZnSn(Sx,Se1−x)4 Solar Cells: Break the Limitations of VOC and FF
Authors:
Abstract
Increasing the fill factor (FF) and the open‐circuit voltage (VOC) simultaneously together with non‐decreased short‐circuit current density (JSC) are a challenge for highly efficient Cu2ZnSn(S,Se)4 (CZTSSe) solar cells. Aimed at such target in CZTSSe solar cells, a synergistic strategy to tailor the recombination in the bulk and at the heterojunction interface has been developed, consisting of atomic‐layer deposited aluminum oxide (ALD‐Al2O3) and (NH4)2S treatment. With this strategy, deep‐level CuZn defects are converted into shallower VCu defects and improved crystallinity, while the surface of the absorber is optimized by removing Zn‐ and Sn‐related impurities and incorporating S. Consequently, the defects responsible for recombination in the bulk and at the heterojunction interface are effectively passivated, thereby prolonging the minority carrier lifetime and increasing the depletion region width, which promote carrier collection and reduce charge loss. As a consequence, the VOC deficit decreases from 0.607 to 0.547 V, and the average FF increases from 64.2% to 69.7%, especially, JSC does not decrease. Thus, the CZTSSe solar cell with the remarkable efficiency of 13.0% is fabricated. This study highlights the increased FF together with VOC simultaneously to promote the efficiency of CZTSSe solar cells, which could also be applied to other photoelectronic devices.Keywords
Funding Information
- National Natural Science Foundation of China (U1902218)
This publication has 52 references indexed in Scilit:
- Surface Cleaning and Passivation Using (NH4)2S Treatment for Cu(In,Ga)Se2 Solar Cells: A Safe Alternative to KCNAdvanced Energy Materials, 2014
- High Efficiency Cu2ZnSn(S,Se)4 Solar Cells by Applying a Double In2S3/CdS EmitterAdvanced Materials, 2014
- Impact of Sn(S,Se) Secondary Phases in Cu2ZnSn(S,Se)4 Solar Cells: a Chemical Route for Their Selective Removal and Absorber Surface PassivationACS Applied Materials & Interfaces, 2014
- Ultrafast electron transfer in the nanocomposite of the graphene oxide–Au nanocluster with graphene oxide as a donorJournal of Materials Chemistry C, 2014
- Why are kesterite solar cells not 20% efficient?Thin Solid Films, 2013
- Classification of Lattice Defects in the Kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 Earth‐Abundant Solar Cell AbsorbersAdvanced Materials, 2013
- Electronic properties of the Cu2ZnSn(Se,S)4 absorber layer in solar cells as revealed by admittance spectroscopy and related methodsApplied Physics Letters, 2012
- Low band gap liquid-processed CZTSe solar cell with 10.1% efficiencyEnergy & Environmental Science, 2012
- The path towards a high-performance solution-processed kesterite solar cellSolar Energy Materials and Solar Cells, 2011
- Thin‐film solar cells: device measurements and analysisProgress in Photovoltaics: Research and Applications, 2004