Aerogel/epoxy thermal coatings for carbon fibre reinforced plastic substrates
Open Access
- 14 January 2019
- journal article
- research article
- Published by Taylor & Francis in Journal of Adhesion Science and Technology
- Vol. 33 (6) , 579-594
Abstract
The present work studies an aerogel/epoxy composite that was dip coated onto a carbon fibre substrate by adding the aerogel at the 1 h and the 1.5 mark of the epoxy cure. Both coatings show decrease in thermal conductivity values (39% and 47% respectively) when compared to a pure epoxy coating. The coatings’ reflectance spectra also provided further evidence for the existence of the nano-pores within the aerogel particles. The aerogel coating was modelled using material properties from literature and solved using finite element methods. The model, which validated using experimental data, was then used to predict the coating’s performance in cyclic thermal loads. Additionally, coatings on a single surface- top and bottom; were also modelled and compared with the double coating system wherein it was seen that the double coating system had the lowest rate of temperature change and fluctuations at steady-state in contrast to the bottom coating which, showed the fastest drop in temperature as well as the highest fluctuations at steady state conditions. The performance of the top coating was in the middle.Keywords
This publication has 17 references indexed in Scilit:
- A comparative study on the efficacy of varied surface coatings in fireproofing glass/epoxy compositesPolymer Degradation and Stability, 2012
- Isothermal differential scanning calorimetry study of a glass/epoxy prepregPolymers for Advanced Technologies, 2011
- Aerogel insulation for building applications: A state-of-the-art reviewEnergy and Buildings, 2011
- Hydrophobic and thermal insulation properties of silica aerogel/epoxy compositeJournal of Non-Crystalline Solids, 2009
- Processing and compressive properties of aerogel/epoxy compositesJournal of Materials Processing Technology, 2008
- Studies on Thermal Property of Silica Aerogel/Epoxy CompositeMaterials Science Forum, 2007
- DSC study of the cure kinetics during nanocomposite formation: Epoxy/poly(oxypropylene) diamine/organically modified montmorillonite systemJournal of Applied Polymer Science, 2005
- Applications for silica aerogel productsJournal of Non-Crystalline Solids, 1998
- Near- and mid-infrared spectroscopy studies of an epoxy reactive systemVibrational Spectroscopy, 1996
- Coherent Expanded Aerogels and JelliesNature, 1931