An experimental investigation on the switching reliability of a phase change memory device with an oxidized TiN electrode
Authors:
- 1 September 2006
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 100 (5) , 054506
Abstract
Fluctuations (or drifts) in switching voltages such as programming set/reset voltages and threshold voltage pose serious obstacles to the reliable operation of electrical phase change memory devices. Using a phase change memory device having a phase change material and TiN electrode, these fluctuations are demonstrated to result from device resistances varying with programming cycles. Fluctuating resistances appear to stem primarily from large contact resistances at the interface between the phase change material and the TiN electrode and from inhomogeneous phase distribution across the layer due to unsuccessful heat confinement near the interface with TiN. Oxidation of a TiN electrode surface (via thermal annealing at under an atmospheric gas mixture of and ) is very effective in the reduction of fluctuations in device resistances and switching voltages hence the resulting increase in the programming cycles by two orders of magnitude. From a high resolution transmission electron microscopy, the oxidized surface was shown to consist of a titanium oxide layer primarily with crystallites which is presumed to yield enhanced stability of the device by the following two effects. Firstly, Ge, Sb, and Te atoms would have stronger bonds to oxygen atoms than to nitrogen atoms by about , thereby producing more robust interface. Accordingly, the magnitude of contact resistance and its variation are reduced significantly so as to have little influence on the device resistances and their fluctuations. Secondly, thermally and electrically more resistive nature of the oxide layer would tend to yield, by enhanced generation and confinement of Joule heat, more uniform temperature distribution across the phase change material layer, rendering possibly a more homogeneous single phase material hence steadier sheet resistances with programming cycles.
Keywords
This publication has 10 references indexed in Scilit:
- 4-Mb MOSFET-selected /spl mu/trench phase-change memory experimental chipIEEE Journal of Solid-State Circuits, 2005
- A 0.18-/spl mu/m 3.0-V 64-Mb nonvolatile phase-transition random access memory (PRAM)IEEE Journal of Solid-State Circuits, 2005
- Reliability Study of Phase-Change Nonvolatile MemoriesIEEE Transactions on Device and Materials Reliability, 2004
- Lower Voltage Operation of a Phase Change Memory Device with a Highly Resistive TiON LayerJapanese Journal of Applied Physics, 2004
- Composition and Properties of Layered Compounds in the GeTe–Sb2Te3SystemInorganic Materials, 2001
- Experimental and theoretical investigations of laser-induced crystallization and amorphization in phase-change optical recording mediaJournal of Applied Physics, 1997
- Morphology-dependent oxidation behavior of reactively sputtered titanium–nitride filmsJournal of Vacuum Science & Technology A, 1997
- Obtaining the specific contact resistance from transmission line model measurementsIEEE Electron Device Letters, 1982
- The mechanism of threshold switching in amorphous alloysReviews of Modern Physics, 1978
- Electrical Properties ofSingle CrystalsPhysical Review B, 1968