Assessment of Methods to Derive Tensile Properties of Ultra-High-Performance Fiber-Reinforced Cementitious Composites
Open Access
Abstract
There is no unified method for deriving the tensile properties of fiber-reinforced ultra-high-performance cementitious composites (UHPCC). This study compares the most common material tests based on a large series of laboratory tests performed on a self-developed UHPCC mixture. The cementitious matrix, with a compressive strength of over 150 MPa and a matrix tensile strength of 8–10 MPa, was reinforced with 2% by volume of 15 mm long and 0.2 mm diameter straight high-strength steel microfibers. Over 100 uniaxial tensile tests were performed on three test configurations using cylindrical cores drilled out from larger prismatic specimens in three perpendicular directions. In addition to uniaxial tests, flexural tests on prismatic elements and flexural tests on thin plates were conducted, and the tensile properties were derived through digital image correlation (DIC) measurements and inverse analysis. Furthermore, splitting tensile tests on cylindrical specimens were employed to ascertain the tensile properties of the matrix. The outcomes of the diverse laboratory tests are presented and discussed in detail. The relationships between crack width and deflection in the context of flexural tests were developed and presented. In conjunction with compression tests and modulus of elasticity tests, the constitutive law is presented for the investigated materials.Keywords
Funding Information
- Österreichische Forschungsförderungsgesellschaft (826881)
This publication has 43 references indexed in Scilit:
- Derivation of the σ‐w relationship for SFRC from prism bending testsStructural Concrete, 2014
- Tensile behavior of Ultra High Performance Hybrid Fiber Reinforced ConcreteCement and Concrete Composites, 2012
- Comparative flexural behavior of four fiber reinforced cementitious compositesCement and Concrete Composites, 2008
- Bending testMaterials and Structures, 2002
- Uni-axial tension test for steel fibre reinforced concreteMaterials and Structures, 2001
- Caractérisation des performances d'un béton renforcé de fibres à partir d'un essai de flexion. Partie 2: Identification d'une loi de comportement intrinsèque en tractionMaterials and Structures, 1999
- Caractérisation des performances d'un béton renforcé de fibres à partir d'un essai de flexion. Partie 1: De la subjectivité des indices de ténacitéMaterials and Structures, 1999
- Tensile cracking in concrete and sandstone: Part 2—Effect of boundary rotationsMaterials and Structures, 1996
- Composition of reactive powder concretesCement and Concrete Research, 1995
- The wedge splitting test, a new method of performing stable fracture mechanics testsEngineering Fracture Mechanics, 1990