Combustion Performance of Sludge From a Wastewater Treatment Plant in Fluidized Bed. Factorial Modeling and Optimization of Emissions
Authors:
Open Access
- 7 May 2019
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Energy Research
- Vol. 7
Abstract
The combustion performance of a bio-solid waste from a wastewater treatment plant was studied in terms of efficiency and gaseous emissions, by carrying out experiments in a bubbling fluid bed unit and was compared with that of an agricultural waste. The effects of excess air and fuel feeding rate were investigated and a factorial design and modeling was developed in order to provide optimal values of process variables for minimizing emissions. The results showed that sewage sludge fuel burned at a much lower temperature than the woody fuel. CO emissions were low, SO2 emissions from the agricultural waste negligible, while those of sewage sludge exceeded legislation limits when excess air was below 50%. An increase in excess air from 30 to 50%, or of fuel feeding rate from 0.48 to 0.6 kg/h, resulted in higher NOx emissions from the woody fuel, exceeding emission guidelines. Concerning SO2 and NOx emissions from sewage sludge fuel, the effect of feeding rate was the same, however that of excess air was opposite, reducing their levels in flue gases. Combustion efficiency for both fuels was high, between 98.5 and 99.6%. Factorial design analysis and modeling indicated that for the woody fuel the optimum emission performance was accomplished when the feeding rate was 0.48 kg/h and the excess air 30%. For the sewage sludge fuel the optimum combustion and emission performance was achieved when the feeding rate was 0.72 kg/h and the excess air 50%.Keywords
This publication has 24 references indexed in Scilit:
- Effects of blending hydrothermally treated municipal solid waste with coal on co-combustion characteristics in a lab-scale fluidized bed reactorApplied Energy, 2013
- Fluidized bed combustion and fragmentation of wet sewage sludgeExperimental Thermal and Fluid Science, 2012
- Effect of freeboard extension on co-combustion of coal and olive cake in a fluidized bed combustorBioresource Technology, 2010
- Combustion characteristics of rice-husk in a short-combustion-chamber fluidized-bed combustor (SFBC)Applied Thermal Engineering, 2010
- Co-combustion of coal and sewage sludge: Chemical and ecotoxicological properties of ashesJournal of Hazardous Materials, 2009
- Combustion characteristics of sewage sludge in an incineration plant for energy recoveryFuel Processing Technology, 2009
- Scale-up study on combustibility and emission formation with two biomass fuels (B quality wood and pepper plant residue) under BFB conditionsBiomass and Bioenergy, 2008
- The behaviour of ashes and heavy metals during the co-combustion of sewage sludges in a fluidised bedWaste Management, 2003
- NOx and N2O emission characteristics from fluidised bed combustion of semi-dried municipal sewage sludgeFuel, 2001
- Sewage sludge combustionProgress in Energy and Combustion Science, 1999