Efficient Methods of Measuring Shielding Effectiveness of Electrically Large Enclosures Using Nested Reverberation Chambers With Only Two Antennas
- 2 May 2017
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 59 (6) , 1872-1879
Abstract
Measuring the shielding effectiveness (SE) of physically small but electrically large enclosures is an important concern in electronics industry. In recent years, reverberation chambers (RCs) are becoming prevalent in determining the SE of such enclosures. Conventionally, frequency-domain (FD) measurement is adopted. It requires three antennas (one transmitting antenna and one receiving antenna in the large RC and one receiving antenna in the nested small enclosure). Furthermore, to obtain good accuracy, the knowledge of the efficiency of the two receiving antennas is also required. To promote the industrial application of RCs for SE measurement, simplified methods are desired. In this paper, simplified measurement methods are proposed and studied both in the FD and the time domain (TD). Only two antennas are required in the proposed methods. Thus, the measurement setup is greatly simplified. It is found that in the TD, a fast and accurate measurement method can be realized with the simplified measurement setup. Moreover, the measurement simplification can go a step further by replacing the RC with an electrically large metallic enclosure in the TD. The measurement results demonstrate that the TD approach outperforms the FD approach in many ways. The proposed methods have the merits of high efficiency, good accuracy, and simple measurement setups. They are very suitable for SE measurement of electrically large enclosures.Keywords
This publication has 18 references indexed in Scilit:
- Efficient and Accurate Measurement of Absorption Cross Section of a Lossy Object in Reverberation Chamber Using Two One-Antenna MethodsIEEE Transactions on Electromagnetic Compatibility, 2016
- Characterizing reverberation chambers by measurements of the enhanced backscatter coefficient2012
- Characterization of Reverberation Chambers for OTA Measurements of Wireless Devices: Physical Formulations of Channel Matrix and New Uncertainty FormulaIEEE Transactions on Antennas and Propagation, 2012
- Reverberation Chamber Techniques for Determining the Radiation and Total Efficiency of AntennasIEEE Transactions on Antennas and Propagation, 2012
- Wireless RF Energy Propagation in Multiply-Connected Reverberant SpacesIEEE Antennas and Wireless Propagation Letters, 2011
- Reverberant Microwave Propagation in Coupled Complex CavitiesIEEE Transactions on Electromagnetic Compatibility, 2010
- Electromagnetic Fields in Cavities2009
- Use of Reverberation Chambers to Determine the Shielding Effectiveness of Physically Small, Electrically Large Enclosures and CavitiesIEEE Transactions on Electromagnetic Compatibility, 2008
- Shielding effectiveness measurements of materials using nested reverberation chambersIEEE Transactions on Electromagnetic Compatibility, 2003
- Electronic mode stirring for reverberation chambersIEEE Transactions on Electromagnetic Compatibility, 1994