Low-density polyethylene-multi-walled carbon nanotube nanocomposite membranes with enhanced conductivity for highly sensitive vapor sensing
Open Access
- 20 September 2023
- journal article
- research article
- Published by Springer Nature in Advanced Composites and Hybrid Materials
- Vol. 6 (5) , 1-12
Abstract
A facile technique was reported for fabricating high conductivity and improved strength of linear low-density polyethylene/multi-walled carbon nanotubes (LLDPE/MWNTs) composite films by the ultrasonication anchoring technique and compression molding treatment. Thermal property, mechanical property, electrical conductivity, microstructures, optical property, and organic vapor sensing behaviors of the MWNTs/LLDPE composite films were studied. The MWNTs are uniformly anchored onto the surface of LLDPE matrix, and the conductive networks are easily formed by the ultrasonication anchoring technique. After compression molding treatment, the incorporation of MWNTs causes an easier formation of LLDPE extended-chain, which is wrapped around of MWNTs shish. The MWNTs/LLDPE composite films exhibit an excellent conductivity of 2.79 × 105Ω∙cm with 0.15 wt % MWNTs. Meanwhile, the tensile strength of the composite films reaches 18.9 MPa. Interestingly, the transparency is not significantly reduced. The sensitivity and reproducibility of vapor sensing behaviors have been demonstrated during immersion-drying runs toward two representative solvents, i.e., acetone and xylene. This work opens up a new direction for the conductivity optimization of MWNTs/LLDPE composite films with a broad prospect in the field of vapor sensor.Keywords
All Related Versions
This publication has 42 references indexed in Scilit:
- Liquid sensing: smart polymer/CNT compositesMaterials Today, 2011
- Recent Developments Concerning the Dispersion of Carbon Nanotubes in PolymersMacromolecular Rapid Communications, 2010
- Direct Formation of Nanohybrid Shish-Kebab in the Injection Molded Bar of Polyethylene/Multiwalled Carbon Nanotubes CompositeMacromolecules, 2009
- Selective Localization and Migration of Multiwalled Carbon Nanotubes in Blends of Polycarbonate and Poly(styrene‐acrylonitrile)Macromolecular Rapid Communications, 2009
- Shear amplification and re-crystallization of isotactic polypropylene from an oriented melt in presence of oriented clay plateletsPolymer, 2005
- Nonisothermal crystallization and melting behavior of mPE/LLDPE/LDPE ternary blendsThermochimica Acta, 2005
- Melting point of polymers under high pressureThermochimica Acta, 2004
- On the improved properties of injection-molded, carbon nanotube-filled PET/PVDF blendsJournal of Power Sources, 2004
- Dielectric spectroscopy on melt processed polycarbonate—multiwalled carbon nanotube compositesPolymer, 2003
- Mechanical and electrical properties of a MWNT/epoxy compositeComposites Science and Technology, 2002