Tailoring CuO x Films via Open‐Air Spatial Atomic Layer Deposition and Their Application in Room‐Temperature Humidity Sensing
Open Access
Abstract
This study demonstrates the tunability of copper oxide (CuO x ) thin films synthesized using open‐air atmospheric‐pressure spatial atomic layer deposition (AP‐SALD). By systematically varying the deposition temperature and copper precursor flow rate, as well as introducing nitrogen doping through in situ oxidant switching (from H 2 O to ammonium hydroxide (NH 4 OH)), the crystallinity, oxidation state, chemical composition, carrier concentration, and resistivity of CuO x films are modulated. Under optimized conditions, CuO x films achieve a very low resistivity of 0.178 Ω·cm and a high carrier concentration of 10 19 cm − 3 —among the best reported for AP‐SALD‐deposited CuO x . As proof of properties tailoring, these films are integrated into interdigitated‐electrode devices and evaluated as chemiresistive humidity sensors at room temperature. While CuO x films cannot typically sense humidity at room temperature, a film deposited at 225 °C and 350 sccm Cu flow exhibits a limit of detection of 99 ppm and a sensitivity of 0.244 Ω ppm −1 . This work establishes AP‐SALD as a powerful tool for tuning CuO x film properties via controlled deposition conditions and in situ doping—enabling application‐specific optimization for future optoelectronic or sensing platforms.Keywords
Funding Information
- Canada First Research Excellence Fund (CFREF‐TQT)
- Waterloo Institute for Nanotechnology, University of Waterloo (WIN‐Velocity Scholarship)
- Natural Sciences and Engineering Research Council of Canada (RGPIN‐03548‐2023)
- Natural Sciences and Engineering Research Council of Canada (DGDND‐2023‐03548)
This publication has 39 references indexed in Scilit:
- Nitrogen doping of cuprous oxide films: A surface science perspectiveApplied Surface Science, 2024
- Spatial atomic layer deposition of nitrogen-doped alumina thin films for high-performance perovskite solar cell encapsulationNano Energy, 2024
- Enhancement of hole mobility in high-rate reactively sputtered Cu2O thin films induced by laser thermal annealingApplied Surface Science, 2024
- Zinc Aluminum Oxide Encapsulation Layers for Perovskite Solar Cells Deposited Using Spatial Atomic Layer DepositionSmall Methods, 2023
- Selective spatial atomic layer deposition of Cu, Cu2O, and CuO thin films in the open air: reality or fiction?Materials Today Chemistry, 2023
- Nanoscale Film Thickness Gradients Printed in Open Air by Spatially Varying Chemical Vapor DepositionAdvanced Functional Materials, 2021
- Pulsed laser deposition of single phase n- and p-type Cu2O thin films with low resistivityMaterials & Design, 2020
- Single-phase Cu2O and CuO thin films obtained by low-temperature oxidation processesJournal of Alloys and Compounds, 2018
- Deposition of CuO thin film prepared by DC reactive magnetron sputteringMaterials Today: Proceedings, 2018
- Spatial Atomic Layer Deposition (SALD), an emerging tool for energy materials. Application to new-generation photovoltaic devices and transparent conductive materialsComptes Rendus. Physique, 2017