Flank Modification Methodology for Face-Hobbing Hypoid Gears Based on Ease-Off Topography
Authors:
- 1 December 2006
- journal article
- Published by Wiley in Journal of Mechanical Design
- Vol. 129 (12) , 1294-1302
Abstract
The fundamental design of spiral bevel and hypoid gears is usually based on a local synthesis and a tooth contact analysis of the gear drive. Recently, however, several flank modification methodologies have been developed to reduce running noise and avoid edge contact in gear making, including modulation of tooth surfaces under predesigned transmission errors. This paper proposes such a flank modification methodology for face-hobbing spiral bevel and hypoid gears based on the ease-off topography of the gear drive. First, the established mathematical model of a universal face-hobbing hypoid gear generator is applied to investigate the ease-off deviations of the design parameters—including cutter parameters, machine settings, and the polynomial coefficients of the auxiliary flank modification motion. Subsequently, linear regression is used to modify the tooth flanks of a gear pair to approximate the optimum ease-off topography suggested by experience. The proposed method is then illustrated using a numerical example of a face-hobbing hypoid gear pair from Oerlikon’s Spiroflex cutting system. This proposed flank modification methodology can be used as a basis for developing a general technique of flank modification for similar types of gears.Keywords
This publication has 8 references indexed in Scilit:
- Fourth-Order Kinematic Synthesis for Face-Milling Spiral Bevel Gears With Modified Radial Motion (MRM) CorrectionJournal of Mechanical Design, 2005
- Optimized Bearing Ellipses of Hypoid Gears1Journal of Mechanical Design, 2003
- Design and Stress Analysis of Low-Noise Adjusted Bearing Contact Spiral Bevel GearsJournal of Mechanical Design, 2002
- Direct gear tooth contact analysis for hypoid bevel gearsComputer Methods in Applied Mechanics and Engineering, 2002
- Optimal Machine Tool Setting for Hypoid Gears Improving Load DistributionJournal of Mechanical Design, 2000
- Mathematical Model of Universal Hypoid Generator With Supplemental Kinematic Flank Correction MotionsJournal of Mechanical Design, 2000
- The Ultimate Motion GraphJournal of Mechanical Design, 1999
- Computer-aided manufacturing of spiral bevel and hypoid gears with minimum surface-deviationMechanism and Machine Theory, 1998