The role of the pressure index in porosity formation in A356 alloy castings
Authors:
- 1 January 1995
- journal article
- research article
- Published by Taylor & Francis in Cast Metals
- Vol. 7 (4) , 219-225
Abstract
Porosity formation in A356 aluminium plate castings was studied experimentally and theoretically. Analysis of a model introduced in this paper led to the formulation of a pressure index, P*, which was expressed in terms of the thermal parameters G, Vs and tf (where G is the thermal gradient, Vs is the solidus velocity and tris the local solidification time), and the alloy's physical constants. The index, determined from the effects of local pressure drops based on Darcy's law and surface tension within the interdendritic liquid, was employed to estimate the formation of porosity in A356 alloy castings. The experimental and theoretical results indicated that porosity content is inversely proportional to P*, and that porosity content tends to decrease with increasing G0.38/V1.62 when this parameter is less than 0.05°C0.38 min1.62 cm−2. As the value of G0.38/V1.62 is increased over approximately 0.05 °C0.38 min1.62 cm−2, the porosity content was found to be independent of this parameter.Keywords
This publication has 8 references indexed in Scilit:
- The effect of na and Sr modification on surface tension and volumetric shrinkage of A356 alloy and their influence on porosity formationMetallurgical Transactions B, 1993
- Mechanisms of porosity formation during solidification: A theoretical analysisMetallurgical Transactions B, 1993
- Study of microporosity formation in nickel-base superalloysMetallurgical Transactions A, 1988
- Centerline porosity in plate castingsMetallurgical Transactions B, 1985
- Mathematical modeling of porosity formation in solidificationMetallurgical Transactions B, 1985
- Interdendritic fluid flow in a lead-tin alloyMetallurgical Transactions B, 1976
- The dendrite arm spacings of aluminum-copper alloys solidified under steady-state conditionsMetallurgical Transactions A, 1975
- Specific permeability of partially solidified dendritic networks of Al-Si alloysMetallurgical Transactions, 1974