Significantly enhanced permittivity and energy density in dielectric composites with aligned BaTiO3lamellar structures
- 17 December 2019
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 8 (6) , 3135-3144
Abstract
A significant improvement of permittivity and energy density will enable the miniaturization of dielectric capacitors and promote integration for applications in electrical power and defense systems. In this work, lamellar composite architectures are fabricated from aligned barium titanate (BaTiO3) in an epoxy resin using the freeze casting method. Due to the continuous coupling effect originating from the interconnected and highly oriented BaTiO3 particles, these composites exhibit an extremely high permittivity (εr = 1408) at 1 kHz, which is the highest value achieved in BaTiO3/polymer composites reported so far and fits well to the parallel mode of the mixing rule. A finite element model is used to investigate the local electric field distributions in the BaTiO3 lamellae under the applied electric field parallel and perpendicular to the freezing direction, respectively. A high ratio value of discharge energy density per electric field, Udis/E, ∼0.033, is achieved due to a high electric displacement of D = 15.11 μC cm−2 and a discharge energy density of Udis = 19.6 × 10−2 J cm−3 is achieved at a low electric field (6 kV mm−1). This work provides an effective strategy of designing a ceramic–polymer composite to realize high permittivity and energy density of capacitors for modern electrical and electronic industries.Keywords
Funding Information
- China Postdoctoral Science Foundation (2017M620353, 2018T110840)
- National Natural Science Foundation of China (51672311, U19A2087)
- Central South University
- Natural Science Foundation of Hunan Province (2019JJ40349)
This publication has 61 references indexed in Scilit:
- Dielectric Behavior of Epoxy/BaTiO3 Composites Using Nanostructured Ceramic Fibers Obtained by ElectrospinningACS Applied Materials & Interfaces, 2013
- Fundamentals, processes and applications of high-permittivity polymer–matrix compositesProgress in Materials Science, 2012
- Nanocomposite Capacitors: Enhanced Energy Storage in Nanocomposite Capacitors through Aligned PZT Nanowires by Uniaxial Strain Assembly (Adv. Energy Mater. 4/2012)Advanced Energy Materials, 2012
- Effects of pore size and orientation on dielectric and piezoelectric properties of 1–3 type porous PZT ceramicsJournal of the European Ceramic Society, 2011
- Piezoelectric Properties of PZT‐Based Ceramic with Highly Aligned PoresJournal of the American Ceramic Society, 2008
- Ice-Templated Materials: Sophisticated Structures Exhibiting Enhanced Functionalities Obtained after Unidirectional Freezing and Ice-Segregation-Induced Self-AssemblyChemistry of Materials, 2008
- Study on microstructure and dielectric property of the BaTiO3/epoxy resin compositesComposites Science and Technology, 2008
- Ice-templated porous alumina structuresActa Materialia, 2007
- Freezing as a Path to Build Complex CompositesScience, 2006
- High‐Dielectric‐Constant Silver–Epoxy Composites as Embedded DielectricsAdvanced Materials, 2005