Joint Stiffness Identification and Deformation Compensation of Serial Robots Based on Dual Quaternion Algebra
Open Access
- 25 December 2018
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 9 (1) , 65
Abstract
As the application of industrial robots is limited by low stiffness that causes low precision, a joint stiffness identification algorithm for serial robots is presented. In addition, a deformation compensation algorithm is proposed for the accuracy improvement. Both of these algorithms are formulated by dual quaternion algebra, which offers a compact, efficient, and singularity-free way in robot analysis. The joint stiffness identification algorithm is derived from stiffness modeling, which is the combination of the principle of virtual work and dual quaternion algebra. To validate the effectiveness of the proposed identification algorithm and deformation compensation algorithm, an experiment was conducted on a dual arm industrial robot SDA5F. The robot performed a drilling operation during the experiment, and the forces and torques that acted on the end-effector (EE) of both arms were measured in order to apply the deformation compensation algorithm. The results of the experiment show that the proposed identification algorithm is able to identify the joint stiffness parameters of serial industrial robots, and the deformation compensation algorithm can improve the accuracy of the position and orientation of the EE. Furthermore, the performance of the forces and torques that acted on the EE during the operation were improved as well.Keywords
This publication has 30 references indexed in Scilit:
- A New Decoupling Method for Explicit Stiffness Analysis of Kinematically Redundant Planar Parallel Kinematic MechanismMathematical Problems in Engineering, 2015
- Identification of the manipulator stiffness model parameters in industrial environmentMechanism and Machine Theory, 2015
- Calibration method of robot base frame using unit quaternion formPrecision Engineering, 2015
- FEM-Based Generation of Stiffness MapsIEEE Transactions on Robotics, 2015
- Structural Optimization of Slender Robot Arm Based on Sensitivity AnalysisMathematical Problems in Engineering, 2012
- Strapdown inertial navigation system algorithms based on dual quaternionsIEEE Transactions on Aerospace and Electronic Systems, 2005
- Conservative Congruence Transformation for Joint and Cartesian Stiffness Matrices of Robotic Hands and FingersThe International Journal of Robotics Research, 2000
- Hand-Eye Calibration Using Dual QuaternionsThe International Journal of Robotics Research, 1999
- A comparative study of three methods for robot kinematicsIEEE Transactions on Systems, Man, and Cybernetics, Part B (Cybernetics), 1998
- Calibration and accuracy of manipulation robot models—An overviewMechanism and Machine Theory, 1994