Thick LiNbO3 layers on diamond-coated silicon for surface acoustic wave filters
Authors:
- 12 August 2002
- journal article
- research article
- Published by AIP Publishing in Applied Physics Letters
- Vol. 81 (7) , 1329-1331
Abstract
Surface acoustic wave (SAW) technology based on lithium niobate/diamond/silicon multilayered structures has been investigated due to the large demand of frequency filters for communication systems, particularly for cellular phones. Thick layers (∼1 μm) with a good morphology, i.e., surface roughness lower than 10 nm have been grown at 490 °C on diamond-coated silicon substrates by multistep rf magnetron sputtering. A SAW devices operating at 300 MHz was designed and fabricated in order to validate the proposed structure; in particular, our main objective was to verify the high velocity in the layered structure. Preliminary filter responses were very promising: the SAW velocity was estimated to 8200 m/s and the coupling factor was The film growth, the technology, and the electrical measurements are described in this letter.
Keywords
This publication has 5 references indexed in Scilit:
- LiNbO 3 thick films grown on sapphire by using a multistep sputtering processJournal of Applied Physics, 2001
- Lithium niobate thin films on diamond/silicon substrates for surface acoustic wave filter device applicationsIntegrated Ferroelectrics, 2001
- Surface acoustic wave impedance element filters for 5 GHzApplied Physics Letters, 1999
- Design and performance of a SAW ladder-type filter at 3.15 GHz using SAW mass-production technology [wireless LANs]IEEE Transactions on Microwave Theory and Techniques, 1999
- Theoretical study on SAW characteristics of layered structures including a diamond layerIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1995