Modelling and experimental investigation of waste tyre pyrolysis process in a laboratory reactor
Open Access
- 1 September 2017
- journal article
- Published by Walter de Gruyter GmbH in Chemical and Process Engineering: New Frontiers
- Vol. 38 (3) , 445-454
Abstract
A mathematical model of waste tyre pyrolysis process is developed in this work. Tyre material decomposition based on a simplified reaction mechanism leads to main product lumps: noncondensable (gas), condensable (pyrolytic oil) and solid (char). The model takes into account kinetics of heat and mass transfer in the grain of the shredded rubber material as well as surrounding gas phase. The main reaction routes were modelled as the pseudo-first order reactions with a rate constant calculated from the Arrhenius type equation using literature values of activation energy determined for main tyre constituents based on TG/DTG measurements and tuned pre-exponential parameter values obtained by fitting theoretical predictions to the experimental results obtained in our laboratory reactor. The model was implemented within the CFD software (ANSYS Fluent). The results of numerical simulation of the pyrolysis process revealed non-uniformity of sample’s porosity and temperature. The simulation predictions were in satisfactory agreement with the experimentally measured mass loss of the tyre sample during pyrolysis process investigated in a laboratory reactor.Keywords
This publication has 12 references indexed in Scilit:
- Preliminary Design and Numerical Analysis of a Scrap Tires Pyrolysis SystemEnergy Procedia, 2014
- Features of an efficient and environmentally attractive used tyres pyrolysis with energy and material recoveryRenewable and Sustainable Energy Reviews, 2013
- Pyrolysis of rubber tyre wastes: A kinetic studyFuel, 2013
- Mathematical modeling of rubber tire pyrolysisJournal of Analytical and Applied Pyrolysis, 2012
- Waste tyre pyrolysis: Modelling of a moving bed reactorWaste Management, 2010
- Vacuum Pyrolysis of Waste Tires by Continuously Feeding into a Conical Spouted Bed ReactorIndustrial & Engineering Chemistry Research, 2010
- Valorisation of waste tyre by pyrolysis in a moving bed reactorWaste Management, 2010
- Feedstock recycling of synthetic and natural rubber by pyrolysis in a fluidized bedJournal of Analytical and Applied Pyrolysis, 2009
- Kinetic modelling of tyre pyrolysis in a conical spouted bed reactorJournal of Analytical and Applied Pyrolysis, 2008
- Assessment of tire devolatilization kineticsJournal of Analytical and Applied Pyrolysis, 2005