Effect of annealing temperature on the texture of copper wire
- 1 July 2012
- journal article
- Published by Pleiades Publishing Ltd in Physics of Metals and Metallography
- Vol. 113 (7) , 681-686
Abstract
It has been found by textural analysis methods that, in the course of annealing with heating and cooling at a rate of 100 K/s, the textured state of an oxygen-containing copper wire of grade M00 deformed by drawing to 97% reduction changes, retaining the zonal structure. In the central zone, at a relative current radius from 0 to 0.3, the 〈111〉 orientation dominates to a temperature of 300°C. At the higher temperatures, the 〈100〉 orientation becomes dominant and remains up to 500°C. At relative current radii of 0.6–1.0 (peripheral zone) and 0.3–0.6 (intermediate zone), the dominant 〈100〉 orientation is retained to 300°C; at the higher temperatures, the dominance of the 〈100〉 orientation levels off. As the annealing temperature increases, the intermediate zone wedges out at the expense of growth of the central and peripheral zones. On the whole, the annealing at high temperatures (above 400°C) leads to the predominance of the 〈100〉 orientation; it is highly dominant for relative radii of 0–0.5.This publication has 14 references indexed in Scilit:
- Effect of the strain rate on the properties of electrical copperRussian Metallurgy (Metally), 2011
- Dependence of texture evolution on initial orientation in drawn single crystal copperMaterials Characterization, 2011
- Grain-boundary relaxation in copper before and after equal-channel angular pressing and recrystallizationPhysics of Metals and Metallography, 2010
- Recrystallization of pure copper investigated by calorimetry and microhardnessMaterials Characterization, 2008
- The role of annealing twins during recrystallization of CuActa Materialia, 2007
- Effect of impurities on the recrystallization texture in commercially pure copper-ETP wiresMaterials Science and Engineering: A, 2007
- Recrystallization Mechanisms in Wire-Drawn CopperMaterials Science Forum, 2004
- The evolution of the cube recrystallization texture in cold rolled copper sheetsMaterials Science and Engineering: A, 2003
- The effects of die angle on texture and annealing response of ETP copper wireJournal of Materials Processing Technology, 1996
- Microtextural zones in a copper shaped charge particleMaterials Science and Engineering: A, 1996