Preparation and properties of dc-sputtered IrO2 and Ir thin films for oxygen barrier applications in advanced memory technology
Authors:
- C. U. PinnowCPC. U. Pinnow
- I. KaskoIKI. Kasko
- C. DehmCDC. Dehm
- M. SeibtMSM. Seibt
- U. GeyerUGU. Geyer
- T. TanakaTTT. Tanaka
- K. KawabataKKK. Kawabata
- A. KitabatakeAKA. Kitabatake
- N. FieldhouseNFN. Fieldhouse
- S. M. PurselSPS. M. Pursel
- R. CareyRCR. Carey
- 1 September 2001
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
- Vol. 19 (5) , 1857-1865
Abstract
and Ir thin films have been deposited by dc sputtering in and pure Ar atmospheres, respectively. The microstructural characterization of the films was done by x-ray diffraction and transmission electron microscopy and showed that (nano-)crystalline Ir and films with different textures could be deposited. Stress analyses showed that the stress of the Ir films can be varied from about −3.5 GPa for a deposition temperature of 100 °C to nearly zero stress if deposited at 500 °C. However, films generally exhibited a large compressive stress of about −1.5 GPa, which is nearly independent of substrate temperature, but changed with texture and stoichiometry of the films. Surface and roughness analyses of the cumulatively annealed samples were performed by various analysis methods, and stoichiometry was examined by Rutherford backscattering spectrometry. In situ stress measurements were used to investigate the stress relaxation behavior of the films up to 900 °C. We demonstrate that it is generally possible to optimize reactive sputter deposition by a detailed study of plasma and deposition conditions via recording generic curves for the sputtering system used. At optimized conditions these fine grained films exhibit very high thermal phase stability to at least 800 °C for several hours and a very low roughness. The aim of these investigations is to optimize stability of films under high temperature conditions for oxygen barrier application in dynamic random access memory and nonvolatile Fe random access memory cells.
Keywords
This publication has 25 references indexed in Scilit:
- Integration and electrical properties of diffusion barrier for high density ferroelectric memoryApplied Physics Letters, 2000
- Effect of bismuth on the ferroelectric properties of SrBi2Ta2O9 thin films deposited on Pt/SiO2/Si by a modified radio-frequency magnetron sputtering techniqueJournal of Vacuum Science & Technology A, 1998
- Formation Process and Electrical Property of RuO2 Thin Films Prepared by Reactive SputteringJapanese Journal of Applied Physics, 1998
- Preparation and Characterization of Iridium Oxide Thin Films Grown by DC Reactive SputteringJapanese Journal of Applied Physics, 1997
- Metalorganic chemical vapor deposition of ferroelectric SrBi2Ta2O9 thin filmsApplied Physics Letters, 1996
- Preparation of Pb(Zr,Ti)O3 Thin Films on Ir and IrO2 ElectrodesJapanese Journal of Applied Physics, 1994
- Intrinsic stress in sputter-deposited thin filmsCritical Reviews in Solid State and Materials Sciences, 1992
- The microstructure of sputter‐deposited coatingsJournal of Vacuum Science & Technology A, 1986
- Electrical-Resistivity Model for Polycrystalline Films: the Case of Arbitrary Reflection at External SurfacesPhysical Review B, 1970
- The tension of metallic films deposited by electrolysisProceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character, 1909