Reinforcing effect of glass-fiber-reinforced composite on flexural strength at the proportional limit of denture base resin
- 1 January 2007
- journal article
- research article
- Published by Medical Journals Sweden AB in Acta Odontologica Scandinavica
- Vol. 65 (3) , 141-148
Abstract
Objective. To evaluate the reinforcing effect of fiber-reinforced composite (FRC) on flexural strengths at the proportional limit (FS-PL) of a denture base resin. Material and methods. Bar-shaped acrylic resin specimens and maxillary acrylic resin complete denture specimens were fabricated. The FS-PL of the reinforced bar-shaped specimens was tested. Novel FRC, FibreKor, Remanium, Palatal Bar Wire, and Clasp-Wire were used as reinforcing materials. Likewise, the compressive strength at the proportional limit (CS-PL) of the reinforced maxillary denture specimens was tested. Results. The FS-PL of the bar-shaped specimens reinforced with the FRCs was significantly higher than that of the unreinforced specimenswithouwi. The FS-PL of the bar-shaped specimens reinforced with the 1.0-mm-thick FRC was similar to the FS-PL of specimens reinforced with Remanium or Palatal Bar Wire. The FS-PL of specimens reinforced with the 1.5-mm-thick FRC was significantly higher than with the metal-reinforcing materials. The reinforcing efficiency of the 1.0-mm-thick FRC was 1.78–1.79 and of the 1.5-mm-thick FRC 3.14–3.27. The reinforcing effect of the FRC on the CS-PL of the maxillary denture specimen was similar to the effect on the FS-PL of the bar-shaped specimens. The reinforcing efficiency was 1.40 for the 1.0-mm-thick FRC and 1.67 for the 1.5-mm-thick FRC. Conclusion. The unidirectional glass-fiber-reinforced composite had a reinforcing effect on the flexural strength at the proportional limit of the denture base resin.Keywords
This publication has 26 references indexed in Scilit:
- Effect of water storage on the impact strength of three glass fiber-reinforced compositesDental Materials, 2006
- The static strength and modulus of fiber reinforced denture base polymerDental Materials, 2005
- Survival of glass fibre reinforced composite post restorations after 2 years—an observational clinical studyJournal of Dentistry, 2005
- Acoustic emission analysis of fiber-reinforced composite in flexural testingDental Materials, 2004
- Impact strength of denture polymethyl methacrylate reinforced with continuous glass fibers or metal wireActa Odontologica Scandinavica, 1995
- Transverse strength and fatigue of denture acrylic-glass fiber compositeDental Materials, 1994
- Effe1ct of some properties of metal strengtheners on the fracture resistance of acrylic denture base material constructionJournal of Oral Rehabilitation, 1993
- Evaluation of damage to removable dentures in two cities in FinlandActa Odontologica Scandinavica, 1993
- Effect of metal strengthener's surface roughness on fracture resistance of acrylic denture base materialJournal of Oral Rehabilitation, 1992
- Reinforcement of acrylic resin denture base material with metal or fibre strengthenersJournal of Oral Rehabilitation, 1992