Residual Stress Analysis Based on Acoustic and Optical Methods
Open Access
Abstract
Co-application of acoustoelasticity and optical interferometry to residual stress analysis is discussed. The underlying idea is to combine the advantages of both methods. Acoustoelasticity is capable of evaluating a residual stress absolutely but it is a single point measurement. Optical interferometry is able to measure deformation yielding two-dimensional, full-field data, but it is not suitable for absolute evaluation of residual stresses. By theoretically relating the deformation data to residual stresses, and calibrating it with absolute residual stress evaluated at a reference point, it is possible to measure residual stresses quantitatively, nondestructively and two-dimensionally. The feasibility of the idea has been tested with a butt-jointed dissimilar plate specimen. A steel plate 18.5 mm wide, 50 mm long and 3.37 mm thick is braze-jointed to a cemented carbide plate of the same dimension along the 18.5 mm-side. Acoustoelasticity evaluates the elastic modulus at reference points via acoustic velocity measurement. A tensile load is applied to the specimen at a constant pulling rate in a stress range substantially lower than the yield stress. Optical interferometry measures the resulting acceleration field. Based on the theory of harmonic oscillation, the acceleration field is correlated to compressive and tensile residual stresses qualitatively. The acoustic and optical results show reasonable agreement in the compressive and tensile residual stresses, indicating the feasibility of the idea.Keywords
This publication has 32 references indexed in Scilit:
- A novel method of determining residual stress distributions in plates using the incremental slitting techniqueThe Journal of Strain Analysis for Engineering Design, 2011
- Welding process impact on residual stress and distortionScience and Technology of Welding and Joining, 2009
- Residual stress measurements in welded steel beam column connections by scanning acoustic microscopyJournal of Materials Science, 1999
- Determination of residual shear stresses in composites by a modified layer-removal methodJournal of Materials Science, 1998
- Acoustoelastic measurements on aluminium alloy by means of a contact and a non-contact (LFB acoustic microscopy) techniqueThe Journal of the Acoustical Society of America, 1998
- Mapping stress with ultrasoundNature, 1996
- Ultrasonic stress measurements based on the generalized acoustic ratio techniqueInternational Journal of Solids and Structures, 1996
- Residual-stress measurement in orthotropic materials using the hole-drilling methodExperimental Mechanics, 1994
- Residual-stress measurement by the sectioning methodExperimental Mechanics, 1973
- Second-Order Elastic Deformation of SolidsPhysical Review B, 1953