Optimization of Forming Parameters and Forming Strategy for Stamping of Novel Ultra-Thin Super Ferritic Stainless Steel Bipolar Plates Based on Numerical Simulation

Authors:
Open Access
Publisher website
Google Scholar
Abstract
This study investigates the forming process (stamping) of bipolar plates which have applied a novel ultra-thin (0.1 mm) super ferritic stainless steel, i.e., SUS470, whose chromium is sufficiently high for corrosion resistance. A three-dimensional finite element model of the stamping process was developed using the commercial software ABAQUS version 2022. The model incorporated optimized die parameters obtained through Central Composite Design (CCD). This model was used to analyze the effects of key forming parameters, including stamping speed and friction coefficient, on the distribution of stress, strain, and thickness reduction during the stamping process. The finite element modeling (FEM) results disclose that the inner corner of the flow channel is a critical defect-prone region, exhibiting stress concentration, uneven strain distribution, and severe thinning. The optimal forming quality can be achieved at a stamping speed of 100 mm/s and a friction coefficient of 0.185 among all varied options. Further, a comparative study of single-stage, conventional two-stage, and optimized two-stage stamping strategies based on previous investigation demonstrates that the optimized two-stage stamping process can effectively alleviate stress and strain concentrations at the corners, significantly reduce thinning problems, and enhance the uniformity and stability during stamping. In summary, this study provides theoretical support for the design of the forming process (stamping) of high-performance super ferritic stainless steel bipolar plates, which is beneficial to subsequent practical engineering application.
Funding Information
  • BAJC project (BA22009)

This publication has 28 references indexed in Scilit: