A 3D stochastic model integrating depth, fault and property uncertainty for planning robust wells, Njord Field, offshore Norway
Authors:
- 1 January 2005
- journal article
- Published by Geological Society of London in Petroleum Geoscience
- Vol. 11 (1) , 57-65
Abstract
The Njord Field, situated in the Haltenbanken area, is one of the most challenging reservoirs on the Norwegian shelf. The structural complexity is high, with numerous intersecting faults compartmentalizing the reservoir. The reservoir is dominated by alternating shale and sand intervals of tidal, estuarine and deltaic depositional origin. One of the main segments on Njord – the Central Area – was the target for a one-year improved oil recovery study. The Central Area reservoir is produced by depletion, with a current recovery factor of only 6%, as most faults appear to seal during production. The previous drilling experience revealed quite large uncertainty with respect to both depth and missing faults due to poor seismic data quality. In order to plan further wells in this area a model that comprises the full uncertainty with respect to both structural components (depth uncertainty and faults) and property components (facies, permeability, porosity) was made. The model was built by combining commercial modelling software (IRAP RMS and STORM:HORIZON) with an R&D tool (HAVANA) in a manner that has not been attempted previously, and 200 stochastic realizations were run. Each realization has a different structural 3D grid (depth and fault pattern) and different petrophysical properties. A streamline simulator in IRAP RMS was applied to rank the realizations and ten realizations were chosen for further well screening in the flow simulator (ECLIPSE). The model was applied to propose two new well targets that were robust economically (given all uncertainty). In addition, the model was applied in testing various unconventional well types, for example so-called ‘connector-wells’, which are open holes in the reservoir (but not connected to the surface), in order to connect fault blocks bounded by sealing faults. Drilling and subsequent seismic interpretation after the model had been built revealed that the structural uncertainty was even greater than predicted. It is crucial to capture the full interpretation uncertainty and, in particular, to address the problem of jump-correlation across fault blocks. Despite this, however, the observed cumulative production from the new oil producer compares well with the prognosis from the model.Keywords
This publication has 10 references indexed in Scilit:
- The Njord Field: a dynamic hydrocarbon trap2007
- Petrophysical characterization of a heterolithic tidal reservoir interval using a process-based modelling toolPetroleum Geoscience, 2005
- Three-dimensional visualization for well placement and geosteering: Njord Field, offshore mid-NorwayGeological Society, London, Petroleum Geology Conference series, 2005
- Use of 3D Visualization Techniques to Unravel Complex Fault Patterns for Production Planning: Njord Field, Halten Terrace, NorwayGeological Society, London, Memoirs, 2004
- Reservoir compartmentalisation by water-saturated faults — Is evaluation possible with today's tools?2002
- Havana — a fault modeling tool2002
- Sampling of fault populations using sub-surface data: a reviewJournal of Structural Geology, 1996
- Stochastic Models for Seismic Depth Conversion of Geological Horizons1991
- Stochastic Models for Seismic Depth Conversion of Geological Horizons1991
- A Computer Program for Evaluation of Fluvial Reservoirs1990