Resource Utilization of Limestone Powder and Steel Slag Powder in Cement-Based Materials at Extremely Low Water/Binder Ratio
Open Access
Abstract
The large-scale resource utilization of limestone powder generated from mining operations and steel slag waste discharged from the metallurgical industry is of vital importance. The effects of limestone powder or steel slag powder on the properties of cement-based materials at an extremely low water/binder (w/b) ratio of 0.16 under standard curing and early high-temperature curing at 60 °C for 3 d were comparatively studied through measuring the compressive strength, hydration degree and microstructure. The results show that limestone powder promotes the early strength development of concrete at an extremely low w/b ratio better than steel slag powder does under standard curing conditions, but steel slag powder promotes the late strength growth better. For concrete containing 10% and 20% steel slag powder, the compressive strength increased by 20.4 and 33.7 MPa, respectively, from 3 to 7 d, and the difference in their compressive strengths was only 0.4 MPa at 90 d. The limestone powder promotes strength more significantly under early high-temperature curing conditions; however, when the dosage reaches 30%, the long-term strength of the concrete containing steel slag powder is marginally greater compared to the concrete containing limestone powder. At 90 d under early high-temperature curing, the chemically bound water contents of the pastes containing limestone powder ranged from 9.05% to 10.53%, compared with 10.64% to 11.85% for the pastes containing steel slag powder. The diffraction peak intensity of ettringite is stronger in the paste with limestone powder due to the stabilizing effect of limestone powder on ettringite. The diffraction peak intensity of Ca(OH)2 is stronger in the paste with steel slag powder, which exhibits a higher hydration degree and generates more hydration products. The pore structure of the sample containing steel slag powder improves, and the microstructure becomes denser at high temperatures.Keywords
All Related Versions
Funding Information
- National Natural Science Foundation of China (52578265)
- National Natural Science Foundation of China (52293433)
This publication has 30 references indexed in Scilit:
- Investigations on the rehydration of recycled blended SCMs cementCement and Concrete Research, 2022
- Chemical and physical effects of high-volume limestone powder on sodium silicate-activated slag cement (AASC)Construction and Building Materials, 2021
- Inhibition mechanisms of steel slag on the early-age hydration of cementCement and Concrete Research, 2021
- Rheological and mechanical properties of cemented foam backfill: Effect of mineral admixture type and dosageCement and Concrete Composites, 2020
- Utilization of limestone powder and fly ash in blended cement: Rheology, strength and hydration characteristicsConstruction and Building Materials, 2020
- Prediction of the durability performance of ternary cement containing limestone powder and ground granulated blast furnace slagConstruction and Building Materials, 2019
- A quantitative study on physical and chemical effects of limestone powder on properties of cement pastesConstruction and Building Materials, 2019
- Eco-efficient cements: Potential economically viable solutions for a low-CO2 cement-based materials industryCement and Concrete Research, 2018
- Development of an eco-friendly Ultra-High Performance Concrete (UHPC) with efficient cement and mineral admixtures usesCement and Concrete Composites, 2015
- The effect of curing conditions on compressive strength of ultra high strength concrete with high volume mineral admixturesBuilding and Environment, 2007