Fracture failure processes in polymers. I: Mechanical tests and results
Authors:
- 1 January 1998
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 38 (1) , 60-68
Abstract
Tensile tests and Izod impact tests were carried out on eight thermoplastics and an epoxy. The results are compared with shear strengths determined previously, and it is shown that for seven of the polymers, the nominal tensile strength is equal to the yield strength and is approximately the same as the shear strength measured by the punch test. (The true ultimate tensile strength is not always a useful concept because the more ductile polymers are radically changed during the tensile testing process.) In shear tests the shear strains can be extremely high before eventual failure. Because of this the Iosipescu test appears to be unsuitable for measuring the ultimate shear strengths of polymers. Classical shear sliding of failure appears to be rare, and instead most of the polymers appear to be failing in tension when tested in the punch test. (Shear is equivalent to tension at +45° and compression at −45° to the shear directions.) The polymers with shear Strengths that are significantly less than the tensile strengths are brittle ones, and these differences are probably due to flaw statistics. Thus the idea first advanced to explain unduly high interface shear strengths in centrosymmetric systems, i.e., that most polymers ultimately fail in tension when tested in shear, appears to be validated.Keywords
This publication has 9 references indexed in Scilit:
- Shear strength of polymers and fibre composites: 1. thermoplastic and thermoset polymersComposites, 1995
- A new model for interface failure in fibre-reinforced polymersComposites Science and Technology, 1995
- Investigation of the transverse properties of a unidirectional carbon/epoxy laminate: Part 1—Matrix propertiesComposites Science and Technology, 1994
- Failure processes in the fibre-polymer interphaseComposites Science and Technology, 1991
- Study of interfaces of high‐performance glass fibers and DGEBA‐based epoxy resins using single‐fiber‐composite testPolymer Composites, 1989
- Characterization of fibre/resin bonding in composites using a pull-out testInternational Journal of Adhesion and Adhesives, 1981
- Compression strength of carbon, glass and Kevlar-49 fibre reinforced polyester resinsJournal of Materials Science, 1980
- The Yield Behaviour of Glassy Polymers1973
- A Statistical Distribution Function of Wide ApplicabilityJournal of Applied Mechanics, 1951