Identifying Abnormal CFRP Holes Using Both Unsupervised and Supervised Learning Techniques on In-Process Force, Current, and Vibration Signals
Open Access
- 3 May 2022
- journal article
- research article
- Published by Springer Nature in International Journal of Precision Engineering and Manufacturing
- Vol. 23 (6) , 609-625
Abstract
This study aims to conduct abnormality detection by applying machine learning algorithms when drilling a carbon fiber reinforced plastic laminate. In-process signals including current, thrust force, and vibration were captured during the dry drilling experiments using a 6 mm physical vapor deposit diamond-coated drill at the consistent spindle speed of 6500 RPM and 0.05 mm/rev. Across measurements from out-of-process variables, including hole diameter, roundness, surface roughness, entry/exit delamination, and entry/exit uncut fiber area, in-process measurements were most able to find outliers with respect to diameter. Both Principal Component Analysis, an unsupervised dimensionality reduction technique, and Linear Discriminant Analysis, a supervised dimensionality reduction technique, could separate oversize or undersize holes from average-sized holes when using fast Fourier transformation data of in-process vibration. Predictive performance with k-Nearest Neighbors shows that our machine learning pipeline can predict oversized vs. non-oversized holes with over 85% accuracy in this dataset. Peak prediction performance is obtained when in-process measurement data is viewed from the frequency domain, and predictions are weighted based on the relative distances of the nearest neighbors.Keywords
Funding Information
- Korea Institute of Industrial Technology (JE200009)
This publication has 36 references indexed in Scilit:
- A Comparative Study of Carbide Tools in Drilling of CFRP and CFRP-Ti StacksJournal of Manufacturing Science and Engineering, 2013
- Optimization of machining parameters at high speed drilling of carbon fiber reinforced plastic (CFRP) laminatesComposites Part B: Engineering, 2012
- Using artificial intelligence to predict surface roughness in deep drilling of steel componentsJournal of Intelligent Manufacturing, 2011
- Cutting force signal pattern recognition using hybrid neural network in end millingTransactions of Nonferrous Metals Society of China, 2009
- Fuzzy Rule Based Modeling of Drilling Parameters for Delamination in Drilling GFRP CompositesJournal of Reinforced Plastics and Composites, 2008
- Effect of tool wear on delamination in drilling composite materialsInternational Journal of Mechanical Sciences, 2007
- Frequency analysis and characterization in orthogonal cutting of glass fiber reinforced compositesComposites Part A: Applied Science and Manufacturing, 2003
- WEAR MONITORING IN TURNING OPERATIONS USING VIBRATION AND STRAIN MEASUREMENTSMechanical Systems and Signal Processing, 2001
- Orthogonal cutting mechanisms of graphite/epoxy composite. Part II: multi-directional laminateInternational Journal of Machine Tools and Manufacture, 1995
- Nearest Neighbour Searches and the Curse of DimensionalityIMA Journal of Applied Mathematics, 1979