Material properties of indium oxide films prepared by oxygen ion assisted deposition
Authors:
- 15 March 2001
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 89 (6) , 3223-3228
Abstract
Transparent conducting films were deposited on glass substrates by an oxygen ion assisted deposition. Microstructure, chemical composition, electrical, and optical properties of the deposited films were investigated as a function of arrival ratio and ion energy. At 60 eV oxygen ion bombardment, the microstructure was changed from grain structure to domain structure with increasing the arrival ratio. At 500 eV oxygen ion bombardment, the only grain structure was observed, irrespective of the arrival ratio. The ion assisted films had higher oxygen content than the evaporated film without oxygen ion bombardment because of the enhanced reactivity of oxygen due to ionization. Electrical and optical properties of the ion assisted films were significantly dependent on the change of microstructure and chemical composition with varying the arrival ratio and the ion energy. Compared to the films having the grain structure, the films with the domain structure had larger carrier concentration and mobility due to a low grain boundary density acting as a trap and a reduced grain boundary scattering. The high transmittance (≈89%) in the visible spectral range was obtained in the ion assisted films with the large oxygen content and the small surface roughness.
Keywords
This publication has 20 references indexed in Scilit:
- Microstructure and Electrical Properties of Indium Oxide Thin Films Prepared by Direct Oxygen Ion-Assisted DepositionJournal of the Electrochemical Society, 2000
- Effect of hydrogen partial pressure on optoelectronic properties of indium tin oxide thin films deposited by radio frequency magnetron sputtering methodJournal of Applied Physics, 1999
- Deposition of indium tin oxide films on polycarbonate substrates by radio-frequency magnetron sputteringThin Solid Films, 1997
- Surface modification of indium tin oxide by plasma treatment: An effective method to improve the efficiency, brightness, and reliability of organic light emitting devicesApplied Physics Letters, 1997
- Characterization of low-resistivity indium oxide films by Auger electron spectroscopy, x-ray photoelectron spectroscopy, and x-ray diffraction and correlation between their properties, composition, and textureJournal of Vacuum Science & Technology A, 1996
- A microstructural study of low resistivity tin-doped indium oxide prepared by d.c. magnetron sputteringThin Solid Films, 1994
- Microstructure and Electrical Characteristics of Sputtered Indium Tin Oxide FilmsJournal of the Electrochemical Society, 1993
- Structures and properties of electron-beam-evaporated indium tin oxide films as studied by x-ray photoelectron spectroscopy and work-function measurementsJournal of Applied Physics, 1993
- Properties of indium tin oxide films prepared by the electron beam evaporation method in relation to characteristics of indium tin oxide/silicon oxide/silicon junction solar cellsJournal of Applied Physics, 1992
- Transparent conductors—A status reviewThin Solid Films, 1983