Removal of Fine Particles from Gases in a Magnetically Stabilized Fluidized Filter
Author:
- 1 April 1993
- journal article
- research article
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 28 (6) , 1241-1252
Abstract
A magnetically stabilized fluidized filter has been used to remove aerosols from gaseous streams, and its performance has been compared to that of an equivalent fixed bed. The filter grains were magnetite particles in the 250 to 795 μm size range. Talc powder was used to prepare the test aerosols. The mode in which a number of variables, including the collector size, the applied magnetic field, the gas velocity, and the aerosol size, affect the degree of agreement between experimental and predicted data has been analyzed. The comparisons yielded good results, suggesting that the behavior of these filters may be predicted from the existing theory initially developed for fixed beds.Keywords
This publication has 12 references indexed in Scilit:
- Electrostatic Collection Efficiency in Binary Fluidized BedsSeparation Science and Technology, 1992
- Aerosol filtration in a magnetically stabilized fluidized bedPowder Technology, 1991
- MAGNETICALLY STABILIZED FLUIDIZATION, PART II: CONTINUOUS GAS FILTRATIONChemical Engineering Communications, 1988
- Experimental investigation of aerosol filtration in magnetically stabilized fluidized bed filtersChemical Engineering Science, 1986
- A new correlation of the initial collection efficiency of granular aerosol filtrationAIChE Journal, 1985
- Particle collection in magnetically stabilized fluidized filtersAIChE Journal, 1985
- Calculation of aerosol collection in fluidized filter bedsAIChE Journal, 1984
- Radial dispersion and flow distribution of gas in magnetically stabilized bedsIndustrial & Engineering Chemistry Process Design and Development, 1982
- Advances in deep bed filtrationAIChE Journal, 1979
- Fluidization: Hydrodynamic Stabilization with a Magnetic FieldScience, 1979