Effect of chain extrender on the compatibility, mechanical and gas barrier properties of poly(butylene adipate‐co‐terephthalate)/poly(propylene carbonate) bio‐composites
- 19 January 2021
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 138 (21)
Abstract
Bio‐composites consisting of poly(butylene adipate‐co‐terephthalate) (PBAT), poly(propylene carbonate) (PPC) and epoxy chain extender ADR 4468 were fabricated via melt blending using a torque rheometer. The relationship of the torque, melt viscosity, and molecular weight of the bio‐composites was established via polymeric liquid theory to estimate the real‐time chain extension reaction rate under different ADR contents. At the meantime, rheological behavior, thermal and mechanical properties, morphologies, gas barrier properties of the PBAT/PPC/ADR bio‐composites were systematically characterized. The corresponding results revealed that the water vapor transmission rate (WVTR) reduced by 50% under 30 phr (parts per hundreds of resin) PPC content. The addition of ADR is beneficial to improve the mechanical properties, thermal stability and phase dispersion of PBAT/PPC without affecting the water barrier property. With 3 phr ADR, the tensile stress and elongation at break were increased from 19.5 MPa and 1184% to 26.9 MPa and 1443%, respectively. In addition, the data of the torque rheometer revealed that the chain extension reaction rate and the melt viscosity was increased with the increasing ADR content, but the reaction rate was reduced with the excessive viscosity.Keywords
Funding Information
- Guangdong Provincial Key Laboratory of Prevention and Control for Severe Clinical Animal Diseases (20190007)
This publication has 44 references indexed in Scilit:
- Thermal, mechanical, and rheological properties of poly(propylene carbonate) cross-linked with polyaryl polymethylene isocyanatePolymer Bulletin, 2013
- Improvement of thermal stability, rheological and mechanical properties of PLA, PBAT and their blends by reactive extrusion with functionalized epoxyPolymer Degradation and Stability, 2012
- Capillary rheometry of polymer melts — Simulation and experimentKorea-Australia Rheology Journal, 2012
- Novel solventless purification of poly(propylene carbonate): Tailoring the composition and thermal properties of PPCPolymer Degradation and Stability, 2012
- Ether linkage in poly(1,2-propylene carbonate), a key structure factor to tune its performancesJournal of Polymer Research, 2012
- Mechanical properties and morphological changes of poly(lactic acid)/polycarbonate/poly(butylene adipate‐co‐terephthalate) blend through reactive processingJournal of Applied Polymer Science, 2011
- The effect of surfactant Tween 80 on the hydrophilicity, water vapor permeation, and the mechanical properties of cassava starch and poly(butylene adipate-co-terephthalate) (PBAT) blend filmsCarbohydrate Polymers, 2010
- AVERAGE SHEAR RATE IN A TWIN‐SCREW EXTRUDER AS A FUNCTION OF DEGREE OF FILL, FLOW BEHAVIOR INDEX, SCREW SPEED AND SCREW CONFIGURATIONJournal of Food Process Engineering, 2010
- Biodegradable mulch films for strawberry productionPolymer Testing, 2010
- MODELING the AVERAGE SHEAR RATE IN A CO‐ROTATING TWIN SCREW EXTRUDERJournal of Food Process Engineering, 1990