Influence of Interfacial Thermal Resistance on Initial Solidification and Heat Transfer in Continuous Casting Mold of Steel
Authors:
- 1 February 2021
- journal article
- research article
- Published by Wiley in Steel Research International
- Vol. 92 (5) , 2000636
Abstract
Herein, a 2D mathematical model is established to investigate the influence of interfacial thermal resistance (Rint) between the slag and the copper plate on the initial solidification and heat transfer in the mold. The profile of the slag rim, the thickness of the solidified shell and the slag in the shell/mold gap, the heat flux on the hot face of copper plate, and the depth of solidified meniscus with different Rint are compared. With the increase in the Rint from 0.5 × 10−4 to 2.0 × 10−4 m2 K W−1, the thickness and the length of the slag rim above the meniscus decrease, the thickness of the solid slag and the solidified shell also decreases, the maximum heat flux decreases from 4.8 to 3.1 MW m−2 in the current condition, and the depth of the solidified meniscus decreases and then increases. According to the mean depth of oscillation marks measured as 0.3 mm, the average Rint is 0.8 × 10−4 m2 K W−1 in the current casting condition. With the Rint of 5.0 × 10−4 m2 K W−1, only liquid slag exists in the shell/mold gap, which indicates that the meniscus solidification and heat transfer is significantly affected by the Rint.Keywords
Funding Information
- National Science Foundation (52004045, 52074054, 51804057, 51874057)
This publication has 35 references indexed in Scilit:
- Entrapment of Inclusions by Solidified Hooks at the Subsurface of Ultra-Low-Carbon Steel SlabMetallurgical and Materials Transactions B, 2018
- Three-Dimensional Distribution of Hooks in Al-Killed Low-Carbon Continuous Casting Steel SlabsMetallurgical and Materials Transactions B, 2018
- Looking into continuous casting mouldIronmaking & Steelmaking: Processes, Products and Applications, 2014
- A Unified Mechanism for the Formation of Oscillation MarksMetallurgical and Materials Transactions B, 2011
- A New Approach for Modelling Slag Infiltration and Solidification in a Continuous Casting MouldISIJ International, 2010
- A new mechanism of hook formation during continuous casting of ultra-low-carbon steel slabsMetallurgical and Materials Transactions A, 2006
- Performance and properties of mould fluxesIronmaking & Steelmaking: Processes, Products and Applications, 2005
- The Role of Mould Fluxes in Continuous Casting-So Simple Yet So ComplexISIJ International, 2003
- Mathematical Modeling of Iron and Steel Making Processes. Mathematical Modeling of Fluid Flow in Continuous Casting.ISIJ International, 2001
- The formation of oscillation marks in the continuous casting of steel slabsMetallurgical Transactions B, 1984