Assessment of Crack Development in Engineered Cementitious Composites Based on Analysis of Acoustic Emissions
- 1 June 2019
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 31 (6)
Abstract
In this study, acoustic emission (AE) analysis was employed to characterize the cracking behavior of various engineered cementitious composites (ECCs) containing different types of fibers. AE monitoring of prism samples cast with these ECCs was conducted in conjunction with four-point flexural tests. An additional conventional concrete (CC) mixture containing coarse aggregates was also examined for the aim of comparison. A number of AE parameters were collected during testing such as signal amplitude, signal strength, and number of hits. Moreover, b-value and intensity analyses were performed on the signal amplitude and signal strength data, respectively. These further analyses yielded three additional parameters including b-value, historic index [ ], and severity ( ). The analysis of these AE parameters was found to be feasible in detecting the onset of micro and macrocracking stages in all ECCs with any fiber type. No significant variations in terms of the studied AE parameters were found between CC and ECCs at the microcracking stage. However, at the macrocracking and failure stages, the average number of hits, CSS, , and were higher, and the b-value was lower in ECCs compared with CC due to the increased number of cracks in ECCs at these stages. The results of this investigation also presented a developed damage characterization chart for all tested ECCs. This chart can successfully be used to identify the micro and macrocracking stages in ECCs based on the corresponding values of the AE intensity analysis parameters [ and ].
Keywords
This publication has 42 references indexed in Scilit:
- Development of green engineered cementitious composites using iron ore tailings as aggregatesConstruction and Building Materials, 2013
- Acoustic emission characterization of the fracture process in fibre reinforced concreteConstruction and Building Materials, 2011
- Engineered Cementitious CompositesTransportation Research Record: Journal of the Transportation Research Board, 2010
- Development of engineered cementitious composites with limestone powder and blast furnace slagMaterials and Structures, 2009
- Tensile and fiber dispersion performance of ECC (engineered cementitious composites) produced with ground granulated blast furnace slagCement and Concrete Research, 2007
- A review on durability properties of strain hardening fibre reinforced cementitious composites (SHFRCC)Cement and Concrete Composites, 2007
- Experimental characterization of the self-healing of cracks in an ultra high performance cementitious material: Mechanical tests and acoustic emission analysisCement and Concrete Research, 2007
- Development of a self-consolidating engineered cementitious composite employing electrosteric dispersion/stabilizationCement and Concrete Composites, 2003
- Micro–macro fracture relationships and acoustic emissions in concreteConstruction and Building Materials, 1999
- Tensile Behavior of Cement‐Based Composites with Random Discontinuous Steel FibersJournal of the American Ceramic Society, 1996