Design and performance of a 3D-Printed magnetorheological fluid-based adaptive vibration isolator
Authors:
- Young T. ChoiYCYoung T. Choi
- Byungseok YooBYByungseok Yoo
- Jungjin ParkJPJungjin Park
- Darryll J. PinesDPDarryll J. Pines
- Norman M. WereleyNorman M. Wereley
Open Access
- 28 March 2023
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Materials
- Vol. 10
Abstract
Emerging additive manufacturing (or 3D printing) can be advantageous for developing magnetorheological fluid (MRF)-based vibration isolators (MRVIs) because their designs can be easily and efficiently customized and also in-situ fabrication and repairing can be possible. In this study, a simple and compact adaptive MRVI was fabricated by using a 3D printing method. A masked stereolithography (MSLA) 3D printer was used for the fabrication of the rubber bellow and plastic lid parts of the MRVI. The electromagnet was mounted onto the lid, the reservoir was filled with an MRF, and the lid was simply assembled with the reservoir using a 3D-printed large thread without traditionally machined components. Using a material testing machine, the damper forces of the 3D-printed MRVI were measured under a constant velocity loading condition for different magnetic fields. From these tests, the magnetic field-controllable performances of the MRVI such as the MR yield force, the dynamic force range, the dissipated energy, and the secant stiffness were obtained. For the evaluation of the long-term performance reliability of the MRVI due to the MRF sedimentation, its magnetic field-controllable performances were tracked for 156 days with the variable testing intervals. Finally, the feasibility of the 3D-printed MRVI was experimentally confirmed.Keywords
This publication has 18 references indexed in Scilit:
- Investigation of sedimentation, rheological, and damping force characteristics of carbonyl iron magnetorheological fluid with/without additivesJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2020
- Development of Anti-Sedimentation Magnetorheological Fluids and Its Implementation to MR Damper2019
- Monitoring sedimentation of magnetorheological fluids using a vertical axis monitoring system with a low aspect ratio sensor coil*Smart Materials and Structures, 2019
- Vibration and damping characteristics of 3D printed Kagome lattice with viscoelastic material fillingScientific Reports, 2018
- Vertical Axis Inductance Monitoring System to Measure Stratification in a Column of Magnetorheological FluidIEEE Transactions on Magnetics, 2016
- Testing and analysis of magnetorheological fluid sedimentation in a column using a vertical axis inductance monitoring systemSmart Materials and Structures, 2016
- Experimental and Theoretical Development of Multiple Fluid Mode Magnetorheological IsolatorsJournal of Guidance, Control, and Dynamics, 2008
- Magnetorheological Isolators Using Multiple Fluid ModesJournal of Intelligent Material Systems and Structures, 2007
- A New MR Fluid-Elastomer Vibration IsolatorJournal of Intelligent Material Systems and Structures, 2007
- Semi-Active Vibration Isolation Using Magnetorheological IsolatorsJournal of Aircraft, 2005