Comparison of Johnson-Cook and modified Johnson-Cook material constitutive models and their influence on finite element modelling of Ti6Al4V orthogonal cutting process
Authors:
- Nithyaraaj Kugalur-PalanisamyNKNithyaraaj Kugalur-Palanisamy
- Edouard Riviere-LorphèvreEREdouard Riviere-Lorphèvre
- Pedro-José ArrazolaPAPedro-José Arrazola
- François DucobuFrançois Ducobu
Open Access
- 2 July 2019
- conference paper
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2113 (1) , 080009
Abstract
Titanium alloys such as Ti6Al4V are widely used and are well known as hard-to-machine material. The material behavior that is described by the constitutive equation plays a pivotal role in modeling and simulation of machining process. The Johnson–Cook material model is widely used for analysis of material flow stress, especially for those materials with a flow stress highly influenced by high values of temperature and strain rate. A continuous improvement on constitutive models for accurate prediction of the work material behavior under machining conditions is observed in the literature. The purpose of this study is to show the influence of the constitutive model by comparing and investigating Johnson-Cook constitutive model with calibrated or modified Johnson-Cook constitutive models that take into account temperature dependent hardening factor and its coupled effects between strain and temperature. This paper deals with the simulation of orthogonal cutting process with those constitutive models. The three constitutive models are included in a Lagrangian cutting finite element model to highlight their influence on the results. Cutting forces and chip morphology are mainly used in the comparison of the numerical results and their validation with an experimental reference.Keywords
This publication has 7 references indexed in Scilit:
- Stress-Strain Curves and Modified Material Constitutive Model for Ti-6Al-4V over the Wide Ranges of Strain Rate and TemperatureMaterials, 2018
- On the importance of the choice of the parameters of the Johnson-Cook constitutive model and their influence on the results of a Ti6Al4V orthogonal cutting modelInternational Journal of Mechanical Sciences, 2017
- Temperature dependent work hardening in Ti–6Al–4V alloy over large temperature and strain rate ranges: Experiments and constitutive modelingMaterials & Design, 2015
- Experimental contribution to the study of the Ti6Al4V chip formation in orthogonal cutting on a milling machineInternational Journal of Material Forming, 2014
- Recent advances in modelling of metal machining processesCIRP Annals, 2013
- Numerical and experimental study of dry cutting for an aeronautic aluminium alloy (A2024-T351)International Journal of Machine Tools and Manufacture, 2008
- Effects of workpiece thermal properties on machining-induced residual stresses - thermal softening and conductivityProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2007