Wireless sensor node remote supply using a compact stacked rectenna array with voltage multipliers at 2.45 GHz
Authors:
- 14 October 2019
- journal article
- research article
- Published by Cambridge University Press (CUP) in International Journal of Microwave and Wireless Technologies
- Vol. 12 (4) , 309-315
Abstract
This paper presents compact rectenna arrays for ambient RF energy harvesting on the 2.45 GHz ISM band. The arrays are based on four and nine series-connected rectenna cells. Each cell is composed of a stacked fractal antenna and an RF-to-dc conversion circuit. The antenna is a compact third Koch fractal shape, fed by a coaxial probe for more compactness. The conversion circuit is a full-wave rectifier with a differential output, each DC polarity is provided by a two-stage Dickson voltage multiplier. Measurement results show a significant increase of the output DC voltage for the one, four, and nine cells rectenna arrays. They provide, for power density of 1.7 μW/cm2, an output DC voltage of 0.9, 2.2, and 4.1 Volts, respectively. The 9 cells rectenna array is used in a remote supply experiment of a temperature and acceleration wireless sensor, where the data are transmitted via a Bluetooth low energy link to a distant smartphone every 1 min.Keywords
This publication has 17 references indexed in Scilit:
- Maximum Achievable Power Conversion Efficiency Obtained Through an Optimized Rectenna Structure for RF Energy HarvestingIEEE Transactions on Antennas and Propagation, 2017
- Electrostatic vibration energy harvester with 2.4-GHz Cockcroft–Walton rectenna start-upComptes Rendus. Physique, 2016
- A New Rectenna Using Beamwidth-Enhanced Antenna Array for RF Power Harvesting ApplicationsIEEE Antennas and Wireless Propagation Letters, 2016
- Polarization Reconfigurable Broadband Rectenna With Tunable Matching Network for Microwave Power TransmissionIEEE Transactions on Antennas and Propagation, 2016
- Design of Koch Fractal Circularly Polarized Antenna for Handheld UHF RFID Reader ApplicationsIEEE Transactions on Antennas and Propagation, 2015
- A High-Efficiency Broadband Rectenna for Ambient Wireless Energy HarvestingIEEE Transactions on Antennas and Propagation, 2015
- Enhancing RF-to-DC conversion efficiency of wideband RF energy harvesters using multi-tone optimization techniqueInternational Journal of Microwave and Wireless Technologies, 2014
- Design of an efficient ambient WiFi energy harvesting systemIET Microwaves, Antennas & Propagation, 2012
- Efficient 2.45 GHz rectenna design including harmonic rejecting rectifier deviceElectronics Letters, 2010
- Recycling Ambient Microwave Energy With Broad-Band Rectenna ArraysIEEE Transactions on Microwave Theory and Techniques, 2004