Fabrication and Characterization of Poly(lactic acid)/Acetyl Tributyl Citrate/Carbon Black as Conductive Polymer Composites
Authors:
- 22 February 2008
- journal article
- research article
- Published by American Chemical Society (ACS) in Biomacromolecules
- Vol. 9 (3) , 1050-1057
Abstract
By using acetyl tributyl citrate (ATBC) as the plasticizer of poly(lactic acid) (PLA) and carbon black (CB) as conductive filler, electrically conductive polymer composites (CPC) with different CB and ATBC contents were prepared. FTIR revealed that the interaction existed between PLA/ATBC matrix and CB filler and ATBC could improve this interaction. The rheology showed that ATBC could obviously decrease the shear viscosity and improve the fluidity of the composites but just the reverse for CB. With the increasing of CB contents, the enforcement effect, storage modulus, and glass-transition temperature increased but the elongation at break decreased. PLA/ATBC/CB composites exhibited the low electrical percolation thresholds of 0.516, 1.20, 2.46, and 2.74 vol % CB at 30, 20, 10, and 0 wt % ATBC. The conductivity of the composite containing 3.98 vol % CB and 30 wt % ATBC reached 1.60 S/cm. Scanning electron microscopy revealed that the addition of ATBC facilitated the dispersion of the CB in the PLA matrix. Water vapor permeability (WVP) showed that, at the same CB contents, the more ATBC contents there were, the less the values of WVP were.Keywords
This publication has 27 references indexed in Scilit:
- Behaviors of the positive temperature coefficient of resistance of poly(styrene‐co‐n‐butylacrylate) filled with Ni‐plated core‐shell polymeric particlesJournal of Polymer Science Part B: Polymer Physics, 2006
- Relationships between organic vapor adsorption behaviors and gas sensitivity of carbon black filled waterborne polyurethane compositesSensors and Actuators B: Chemical, 2006
- Conductive polymer composites obtained from recycled poly(carbonate) and rubber blends for heating and sensing applicationsPolymers for Advanced Technologies, 2006
- Electrical behavior of high impact polystyrene/liquid crystalline polymer blends containing low content of carbon blackJournal of Applied Polymer Science, 2006
- Conductivity of polyolefins filled with high‐structure carbon blackJournal of Applied Polymer Science, 2005
- Thermogravimetric and FTIR studies of chitosan blendsThermochimica Acta, 2003
- Electroactive ThermoplasticsAdvanced Materials, 2000
- Biodegradable PLA-PGA Polymers for Tissue Engineering in OrthopaedicsMaterials Science Forum, 1997
- Synthesis of polylactides, polyglycolides and their copolymersClinical Materials, 1992
- Polylactones: 23. Polymerization of racemic and mesod,l-lactide with various organotin catalysts—stereochemical aspectsPolymer, 1992