Experimental and numerical investigations of single‐hole blast‐induced cracks in concrete based on a calibrated RHT model
Authors:
- 9 April 2025
- journal article
- Published by Wiley in Structural Concrete
- Vol. 27 (1) , 127-142
Abstract
The RHT model is commonly used in the numerical calculation for structural dynamic failure. The accuracy of the numerical results obtained from the RHT model is significantly influenced by the model's parameters. However, the RHT model has many parameters, including 34 parameters in total. Therefore, numerous researchers tend to use the default RHT parameters in the LS‐DYNA user manual for simulations and do not calibrate parameters based on actual research objects. This paper aims to accurately calibrate four categories of parameters related to the concrete RHT model based on the basic mechanical parameters of concrete obtained through a quasi‐static compression experiment. Then, based on the experiment of the single‐hole blast‐induced cracks in concrete, a calibrated RHT model is implemented to predict the experimental results. The final crack morphology observed in the concrete specimens exhibited a general consistency with the simulation results. The specimens exhibited a division into three distinct zones: a crushing zone, a tensile shear failure zone, and an elastic vibration zone. The empirical formula proposed by Hino demonstrated a satisfactory ability to describe the trend of peak pressure change at different radius positions. However, the predicted value exhibited a slight discrepancy with the real value, while the simulated value aligned more closely with the experimental value. The comparison between experimental and simulated results indicates that the calibrated RHT model can well reproduce the crack morphology and pressure distribution in concrete under blasting load. This study provides a theoretical basis and technical guidance for the calibration of the RHT model and the simulation of blast‐induced cracks in concrete.Keywords
Funding Information
- National Natural Science Foundation of China (11872016)
This publication has 19 references indexed in Scilit:
- Strain-based method for assessment of global resistance safety factors for NLNAs of reinforced concrete structuresEngineering Structures, 2024
- Robustness improvements for 2D reinforced concrete moment resisting frames: Parametric study by means of NLFE analysesStructural Concrete, 2023
- Finite element analyses of constitutive models performance in the simulation of blast-induced rock cracksComputers and Geotechnics, 2021
- A modified HJC model for improved dynamic response of brittle materials under blasting loadsComputers and Geotechnics, 2020
- Numerical investigation into the blasting-induced damage characteristics of rocks considering the role of in-situ stresses and discontinuity persistenceComputers and Geotechnics, 2019
- Effects of in-situ stresses on the fracturing of rock by blastingComputers and Geotechnics, 2018
- Numerical predictions of ballistic limits for concrete slabs using a modified version of the HJC concrete modelInternational Journal of Impact Engineering, 2008
- Nonlinear Viscoelastic Constitutive Relations and Nonlinear Viscoelastic Wave Propagation for Polymers at High Strain Rates1996
- Dynamic Behavior of Materials1994
- Constitutive model for concrete under dynamic loadingEarthquake Engineering & Structural Dynamics, 1983