DEM simulation of biomass pyrolysis in a novel interconnected screw reactor
Authors:
- 22 December 2022
- journal article
- research article
- Published by Walter de Gruyter GmbH in International Journal of Chemical Reactor Engineering
- Vol. 21 (8) , 937-949
Abstract
A novel interconnected screw reactor was proposed to convert biomass to bio-oil and bio-char in this study. This reactor is expected to achieve direct heating of pyrolysis feedstocks and increase the reactor processing capacity through the recycling of biochar between the inner and outer screw. Here, we simulated the biomass particle flow and reaction process in this interconnected reactor by an extended discrete element method (DEM), the effect of char circulation on the reactor temperature distribution and the product yields are investigated. The results show that the char circulation increased the heating rate of biomass. At the inner and outer screw speed of 10 rpm and 1 rpm, the char circulation can reach 5.15 kg/h and the average temperature of biomass under the char circulation is about 30 °C higher than that without char circulation. The reaction simulation results show that at 500 °C, the yield of char, bio-oil and non-condensable gas are 18.9%, 40.6% and 40.5% respectively. The predicted product yields of char, bio-oil and non-condensable gas are also in good agreement with the experimental measurements.Keywords
This publication has 35 references indexed in Scilit:
- Modeling and pilot plant runs of slow biomass pyrolysis in a rotary kilnApplied Energy, 2017
- DEM/CFD-DEM Modelling of Non-spherical Particulate Systems: Theoretical Developments and ApplicationsPowder Technology, 2016
- Performance of a commercial-scale biomass fast pyrolysis plant for bio-oil productionFuel, 2016
- Lignocellulosic biomass pyrolysis: A review of product properties and effects of pyrolysis parametersRenewable and Sustainable Energy Reviews, 2016
- Biomass transport cost from field to conversion facility when biomass yield density and road network vary with transport radiusApplied Energy, 2016
- A techno-economic analysis of using mobile distributed pyrolysis facilities to deliver a forest residue resourceBioresource Technology, 2013
- Process optimization of an auger pyrolyzer with heat carrier using response surface methodologyBioresource Technology, 2012
- Discrete particle simulation of particulate systems: Theoretical developmentsChemical Engineering Science, 2007
- Analysis of Convection and Secondary Reaction Effects Within Porous Solid Fuels Undergoing PyrolysisCombustion Science and Technology, 1993
- Thermal or electrical conduction through a granular materialProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1977