Experimental and Numerical Analysis of Qinling Mountain Engineered Rocks during Pulse-Shaped SHPB Test
Authors:
- Jinyu XuJXJinyu Xu
- 12 May 2015
- journal article
- Published by Walter de Gruyter GmbH in International Journal of Nonlinear Sciences and Numerical Simulation
- Vol. 16 (3-4) , 165-171
Abstract
In order to study the dynamic compression mechanical properties of engineering rock under high strain rate (100~102 S−1)loads, dynamic compression tests of three common engineering rocks (marble, sandstone and granite) taken from the Qinling Mountain are studied subjected to five different kinds of shock air pressure using Φ 100 mm split Hopkinson pressure bar test system improved with purple copper waveform shaper. The dynamic compression stress-strain curves, dynamic compressive strength, peak strain, energy absorption rate and elastic modulus of three rocks variation with strain rate are researched. The dynamic compression failure modes under different strain rates are analyzed. Then the three-dimensional numerical simulations of waveform shaper shaping effects and stress wave propagation in the SHPB tests are carried out to reproduce the test results. The research results show that the dynamic compression stress-strain curves show certain discreteness, and there is an obvious rebound phenomenon after the peak. With the increase in strain rate, the dynamic compressive strength, peak strain and energy absorption rate are all in a certain degree of increase, but the elastic modulus have no obvious change trend. Under the same strain rate, the dynamic compressive strength of granite is greatest while of sandstone is least. With the increase in strain rate, the margin of increase in peak strain and energy absorption rate of granite is greatest while of sandstone is least. The failure modes of the sample experience a developing process from outside to inside with the increase of strain rate.Keywords
This publication has 17 references indexed in Scilit:
- Study on dynamic characteristics of marble under impact loading and high temperatureInternational Journal of Rock Mechanics and Mining Sciences, 2013
- Determination of mechanical properties and full-field strain measurements of rock material under dynamic loadsInternational Journal of Rock Mechanics and Mining Sciences, 2013
- Experimental and numerical investigation of pulse-shaped split Hopkinson pressure bar testMaterials Science and Engineering: A, 2012
- Experimental Study on Viscoelastic Behavior of Sedimentary Rock under Dynamic LoadingRock Mechanics and Rock Engineering, 2011
- Effect of strain rate on the mechanical properties of salt rockInternational Journal of Rock Mechanics and Mining Sciences, 2011
- Obtaining Constitutive Relationship for Rate-Dependent Rock in SHPB TestsRock Mechanics and Rock Engineering, 2010
- Dynamic mechanical behavior of some carbonate rocksInternational Journal of Rock Mechanics and Mining Sciences, 2010
- Effects of the geological parameters on rock blasting using the Hopkinson split barInternational Journal of Rock Mechanics and Mining Sciences, 1997
- On the use of SHPB techniques to determine the dynamic behavior of materials in the range of small strainsInternational Journal of Solids and Structures, 1996
- Comparison of uniaxial deformation in shock and static loading of three rocksJournal of Geophysical Research, 1971