Effect of Cross Section Material Distribution on Impact Response of Hybrid Composites
Authors:
- 1 September 2002
- journal article
- research article
- Published by SAGE Publications in Journal of Thermoplastic Composite Materials
- Vol. 15 (5) , 375-387
Abstract
A linear analytical model is proposed to evaluate the magnitude of the impact force as a function of the velocity of the impactor. This model provides a simple tool for estimating the magnitude of the impact load from the impact energy. For hybrid composites subjected to low- and medium-velocity impacts where elastic deformation is assumed, the effect of cross section material distribution on impact response was investigated. For a hybrid metal/polymer laminate and a hybrid titanium composite laminate, the relative position of the laminate plies has a significant effect on the plate deflection under impact loads. For equal a real weight plates, the number of layers in a hybrid composite laminate does not appear to affect the impact resistance. However, the relative material ratio of metal to polymer (or metal to polymeric composite) in hybrid composites significantly affects the impact response. Furthermore, the relative ply thickness in a laminate does not have significant effect on its impact resistance for plates with equal a real weight, but the research shows that the total relative material distribution does significantly affect the impact response. The analysis also shows that the effect of cross section material distribution can be qualitatively evaluated by checking the bending stiffness of the plate.Keywords
This publication has 7 references indexed in Scilit:
- Impact Resistance Modeling of Hybrid Laminated CompositesJournal of Thermoplastic Composite Materials, 1998
- Analysis of impact response in composite platesInternational Journal of Solids and Structures, 1991
- A comparison of solution techniques for impact response of composite platesComposite Structures, 1990
- Transient response of graphite/epoxy and Kevlar/epoxy laminates subjected to impactAIAA Journal, 1989
- Thick Composite Plates Subjected to Lateral LoadingJournal of Applied Mechanics, 1987
- Direct force measurement in normal and oblique impact of plates by projectilesInternational Journal of Impact Engineering, 1987
- Impact Strength of Steel Plates Struck by Projectiles : Evaluation Formula for Critical Fracture Energy of Steel PlateBulletin of JSME, 1982